Scientists Demonstrate Carbon Nanotubes Interaction with Light and Matter

With their research on nanomaterials for optoelectronics, scientists from Heidelberg University and the University of St Andrews (Scotland) have succeeded for the first time to demonstrate a strong interaction of light and matter in semiconducting carbon nanotubes. Such strong light-matter coupling is an important step towards realizing new light sources, such as electrically pumped lasers based on organic semiconductors. They would be, amongst other things, important for applications in telecommunications. These results are the outcome of a cooperation between Prof. Dr Jana Zaumseil (Heidelberg) and Prof. Dr Malte Gather (St Andrews), and have been published in “Nature Communications”.

Organic semiconductors based on carbon are a cost and energy-efficient alternative to conventional inorganic semiconductors such as silicon. Light-emitting diodes consisting of these materials are already ubiquitously found in smartphone displays. Further components for application in lighting technology, data transmission and photovoltaics are currently at the prototype stage. So far, however, it has not been possible to produce one important component of optoelectronics with organic materials – the electrically pumped laser. The main reason is that organic semiconductors have only limited capacity for charge transport.

The formation of exciton-polaritons through strong light-matter coupling is a promising strategy for producing electrically pumped carbon-based lasers. Scientists from Heidelberg University and the University of St Andrews (Scotland) have now, for the first time, demonstrated this strong light-matter coupling in semiconducting carbon nanotubes.(Photo courtesy of Heidelberg University)

Prof. Zaumseil explains that research over the past few years has increasingly focused on laser-like light emission of organic semiconductors based on light-matter coupling. If photons (light) and excitons (matter) are brought to interact sufficiently, they couple so strongly that they produce so-called exciton-polaritons. These are quasi-particles that also emit light. Under certain conditions, such emissions can take on the properties of laser light. Combined with sufficiently fast charge transport, exciton-polaritons could bring the production of an electrically pumped carbon-based laser within reach, according to Jana Zaumseil who is the head of the Nanomaterials for Optoelectronics research group at the Heidelberg University's Institute for Physical Chemistry.

Thanks to the cooperation between Prof. Zaumseil and Prof. Gather, it was possible for the first time to demonstrate the formation of exciton-polaritons in semiconducting carbon nanotubes. Unlike other organic semiconductors, these microscopically small, tube-shaped carbon structures transport positive and negative charges extremely well. PhD student Arko Graf, the first author of the study, explains that exciton-polaritons also display extraordinary optical properties. The scientists in Heidelberg and St Andrews see their research results as an important step towards realizing electrically pumped lasers on the basis of organic semiconductors. Prof. Zaumseil emphasizes: “Besides the potential generation of laser light, exciton-polaritons already allow us to vary the wavelength of the light emitted by the carbon nanotubes over a wide range in the near-infrared.”

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Tokushima, Japan - 6 March 2024: Nichia, the world's largest LED manufacturer and inventor of the high-brightness blue and white LED, has started mass production of the new UV-B (308nm) and UV-A (330nm) LEDs in its popular 434 Series packa... READ MORE

New XLamp® S Line LEDs enhance growth, last longer, lower energy costs Horticulture and other forms of agricultural lighting require application-tuned ratios of spectral content, high efficacy and long lifetimes. Whether you are interested... READ MORE