AIXTRON expecting further growth in 2011

Successful market penetration of latest generation systems
Early demand for LED lighting production equipment continues
R&D capacity increases


AIXTRON SE (ISIN DE000A0WMPJ6), a worldwide leading provider of deposition equipment to the semiconductor industry, delivered in 2010, for the third year in succession, the best operational performance in its history with EUR 783.8m of revenues and a 35% EBIT margin. Guidance for 2011 has been set at EUR 800-900m of revenues with an EBIT margin of circa 35%.

Key Financials
(in EUR million)        FY 2010 FY 2009 +/-     Q4/2010 Q4/2009 +/-   
Revenues        783.8   302.9   159%    224.7   117.9   91%   
Gross profit    411.8   134.7   206%    117.3   55.5    111%  
Gross margin    53%     44%     9 pp    52%     47%     5 pp  
Operating result (EBIT) 275.5   62.7    339%    86.0    33.7    155%  
EBIT margin     35%     21%     14 pp   38%     29%     9 pp  
Net result      192.5   44.8    330%    61.6    24.4    152%  
Net result margin       25%     15%     10 pp   27%     21%     6 pp  
Net result per share - basic (EUR)      1.93    0.49    294%    0.62    0.26    138%  
Net result per share - diluted (EUR)    1.89    0.48    294%    0.60    0.26    131%  
Dividend proposal/dividend per share (EUR)      0.60    0.15    300%                          
                                                      
Equipment Order Intake  748.3   370.1   102%    204.0   163.3   25%   
Equipment Order Backlog (end of period) 274.8*  203.8   35%     274.8*  203.8   35%   
*) revalued on January 1, 2011 to EUR 302.3m at 1.35 USD/EUR

Financial Highlights

In fiscal year 2010, AIXTRON’s revenues were slightly higher than previously guided, at EUR 783.8m, which is over two and a half times more than the 2009 total revenue figure of EUR 302.9m.

The Company’s gross profit increased by 206% to EUR 411.8m in 2010, more than tripling the 2009 figure of EUR 134.7m, in line with higher revenues and a lower cost of sales percentage, resulting in a nine percentage points higher gross margin of 53% (2009: 44%).

The operating result significantly increased by 339% from EUR 62.7m in 2009 to EUR 275.5m in 2010, with a 14 percentage points higher EBIT margin of 35% (2009: 21%).

Net income came in at EUR 192.5m, an increase of 330% over the 2009 figure of EUR 44.8m and results in basic earnings per share of EUR 1.93 for the full year 2010 (2009: EUR 0.49).

As with revenue development; equipment order intake significantly increased in 2010 and was 102% up year on year, at EUR 748.3m (2009: EUR 370.1m). Over the four quarters of the year, orders slightly, but steadily increased to EUR 204.0 in Q4/2010. Latest generation systems made up 55% of those Q4 orders.

The total equipment order backlog of EUR 274.8m at December 31, 2010 was 35% higher than at the same point in time in 2009 with EUR 203.8m.

Dividend proposal

The Executive Board and Supervisory Board will propose to AIXTRON’s Annual Shareholders’ Meeting in May 2011 to pay a dividend of EUR 0.60 per share, which is four times the dividend figure paid out in 2010. This would result in a dividend payout of EUR 60.7m to shareholders and a pay-out ratio of 31.5% based on the group net income.

Management Review

Paul Hyland, President & Chief Executive Officer at AIXTRON, comments: “I think we can afford to very briefly enjoy this moment and have good reason to be proud of this remarkable result with revenues, in USD-terms, of more than one billion.

What we saw in 2010, was not only a continuation of the market driven demand for LEDs for TV backlighting, but also an increased effect of government sponsored demand and some early encouraging investments by customers beginning to position themselves for the emerging LED lighting market.

The market we serve today has clearly been transformed from one small technical niche market into two significantly larger and sustainable mass markets; namely consumer electronics and utility lighting. In a very short period of time, the industry has found that essential ‘critical mass’.

The foundation of our success in the past has been our commitment to innovative Research and Development and focused market-led Engineering, and these are exactly the same qualities that are required to compete in the bigger and more dynamic markets we will be serving in the future. The substantial R&D investments we are making today are a reflection of our commitment to deliver increasingly customer focused solutions for that future.”

Outlook

AIXTRON entered the year with a very solid opening order backlog of EUR 302.3m (revalued from EUR 274.8m at USD 1.35/EUR as of January 1, 2011), all shippable in 2011. AIXTRON Management believes that, with this foundation, AIXTRON can deliver total revenues of EUR 800-900m and an EBIT margin of around 35% in fiscal year 2011.

Financial Tables

Our 2010 full year results presentation as well as all consolidated financial statements (statement of financial position, income statement, cash flow statement, statement of changes in equity) relating to this press release are available at http://www.aixtron.com, section “Investors/Reports/Presentations”, as part of AIXTRON’s Annual Report for the full year 2010.

Investor Conference Call

AIXTRON will host a financial analyst and investor conference call on Tuesday, March 1, 2011, 3:00 p.m. CET (6:00 a.m. PST, 09:00 a.m. EST) to review the full year 2010 results. From 2:45 p.m. CET (5:45 a.m. PST, 8:45 a.m. EST) you may dial in to the call at +49 (69) 247501–899 or +1 (212) 444–0297. A conference call audio replay or a transcript of the conference call will be available at http://www.aixtron.com, section “Investors/Reports/Presentations”, following the conference call.

Contact:

Guido Pickert
Investor Relations and Corporate Communications:      
T: +49-241-8909-444                   
F: +49-241-8909-445                   
invest@aixtron.com                    

For further information on AIXTRON SE (FSE: AIXA, ISIN DE000A0WMPJ6; NASDAQ: AIXG, ISIN US0096061041) please consult our website at: www.aixtron.com.

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Tokushima, Japan - 6 March 2024: Nichia, the world's largest LED manufacturer and inventor of the high-brightness blue and white LED, has started mass production of the new UV-B (308nm) and UV-A (330nm) LEDs in its popular 434 Series packa... READ MORE

New XLamp® S Line LEDs enhance growth, last longer, lower energy costs Horticulture and other forms of agricultural lighting require application-tuned ratios of spectral content, high efficacy and long lifetimes. Whether you are interested... READ MORE