Supercapacitor-based LED Flash Driver Suits Ultra-Slim Phones

ON Semiconductor has introduced the NCP5680 supercapacitor-optimized LED flash driver capable of delivering up to 10A for photo flash and video light in ultra-slim camera phones and compact digital cameras.

"The NCP5680, combined with an ultra-thin prismatic supercapacitor, delivers an ideal LED flash and power management solution for slim camera phones and digital cameras," said Marie-Therese Capron, ON Semiconductor director of low voltage power management products. "This total LED flash solution supplies comparable light energy to xenon flash, but with only half of the comparable solution height and no need for an extra LED for video capture. The NCP5680 enables the Li-ion battery to support more power-hungry functions for a longer time."

When combined with the latest thin, prismatic supercapacitors (such as those offered by CAP-XX and licensed by Murata Manufacturing Co. Ltd Japan with a capacitance of up to 0.9F at 5.5V and the high-power LED OSLUX from Osram), NCP5680 complements the Li-ion battery by supplying high-peak-current of up to 10A for flash lighting optimized for use with the BriteFlash Power Architecture developed by CAP-XX. Fully programmable control of charging and discharging of the supercapacitor and unique overload protection ensure the right amount of light is provided for high-quality photography. The integrated driver can also power other high-peak-current circuits in portable systems, such as audio amplifiers, extending the useful battery operating time.

Low-light conditions
To produce high-resolution pictures in low-light conditions, cameras of 5Mpixels or more require a high-intensity flash. Today's white LEDs can deliver this level of light energy, but require up to 400 percent more power than a camera battery can provide. To support the battery, the NCP5680 manages a supercapacitor to drive the LED flash to full intensity, supplying high-peak-current up to 10A. The integrated driver in the NCP5680 also manages the supercapacitor to handle other peak-power needs: zoom, auto-focus, audio, video, wireless transmissions, GPS readings and RF amplification.

The NCP5680 integrates all circuitry required to charge the supercapacitor, manage in-rush current and control LED current, thus saving designers development time, board space and component cost. Fully programmable control of charging and discharging of the supercapacitor ensures the right amount of light for high-quality photography.

The I²C registers in the NCP5680 allow users to adjust the output current and flash duration of each of the two LEDs in real time. Hence, this solution can perform different lighting effects such as indicator light, pre-flash, and power flashlight for photographing and torchlight for video recording. When connecting to an ambient light sensor, the NCP5680 will automatically limit the flash duration to prevent photo over-exposure, thus preserving the photo quality. Additionally, the supercapacitor charging current is adjustable through an I²C register. NCP5680 can disable the charging operation during global system for mobile (GSM) transmission to limit the current drawn from the battery.

The NCP5680 has multiple built-in protection mechanisms, including flash time out, temperature detection, overload protection and short circuit protection. The device protects the flash circuitry from any faulty conditions of the driving circuit, as well as for the LED.

Available in the 3.5mm x 3.5mm x 0.55mm µQFN-24 package, the NCP5680 is priced at $1.10 per unit in 3,000-unit quantities.

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Tokushima, Japan - 6 March 2024: Nichia, the world's largest LED manufacturer and inventor of the high-brightness blue and white LED, has started mass production of the new UV-B (308nm) and UV-A (330nm) LEDs in its popular 434 Series packa... READ MORE

New XLamp® S Line LEDs enhance growth, last longer, lower energy costs Horticulture and other forms of agricultural lighting require application-tuned ratios of spectral content, high efficacy and long lifetimes. Whether you are interested... READ MORE