2012-10-04

SAP Netherlands selects projectiondesign for new demonstration rooms

Enterprise IT systems software giant, SAP has recently upgraded the audio-visual communications technology at their new Netherlands offices. The upgrade includes F22 projectors from Norway’s projectiondesign® that are installed throughout several demonstration rooms and offices conveniently located in Hertogenbosch, Netherlands, near to the Belgium border.
Continue reading
2012-09-27

Mall of America Renovates Parking Garages with Acuity Brands Energy-Saving Outdoor LED Lighting Solutions

Mall of America achieves significant energy savings, enhances aesthetics and meets some of the nation’s strictest lighting codes with LED outdoor lighting solutions from Acuity Brands. The Mall of America® (“Mall”) renovated its twin 7-story parking garages by installing more than 5,600outdoor LED luminairesfrom Acuity Brands, Inc.(NYSE: AYI). Theparking garages, which span 3.3 million square feet and house more than 12,000 parking spaces, are now equipped with Tersen® Ratio PG LED luminaires and other Tersen brand surface and arm...
Continue reading
2012-09-21

Optogan lights up sportfield in Malta

On Friday 14th September 2012 the renovated Luxol Sport field in Pembroke Malta was officially opened by Norman Darmanin Demajo, President of the Malta Football Association (MFA), in the assistance of Pieter Bregman, official Optogan`s distributor in Malta and Ove Sörensen, Director of Sales & Business Development at Optogan. The opening took place during the evening match between 2nd division teams Gharghur and San Gwann, where everybody could enjoy the game with the new DSF (Dynamic Sport Field) Lighting of Optogan. “It's finally ...
Continue reading
2012-09-21

Does confusion around LG7 risk leaving lighting design in the dark?

Industry standards are an important factor in ensuring quality lighting design for the commercial sector, but specifying fixtures simply because they meet requirements means more advanced solutions may be overlooked.   LEDs are an extremely attractive addition to any portfolio, but in some cases lack of understanding around product availability or experience of LED performance characteristics and capabilities is holding specifiers back.   Much of this confusion arises from the requirements laid out in ‘Lighting Guide 7: Office Lighting’. LG7 is an impo...
Continue reading
2012-09-21

Cooper Lighting Honored with a Prestigious Lighting for Tomorrow Award

One of only four winning LED lighting fixtures, the IRiS 3-inch LED recessed series combines interchangeable optics with energy efficiency and long life.   Cooper Lighting, an industry leader committed to delivering innovative products and driving transformational technology in the lighting industry, is pleased to announce that its IRiS™ Lighting Systems P3LED directional series has been recognized as a winner in the prestigious tenth annual Lighting for Tomorrow competition. The awards, which recognize the best-designed, energy-efficient solid-state ligh...
Continue reading
2012-09-20

Osram Launches Oslon Black Flat LED for loads of light on the road

Osram Opto Semiconductors has introduced new LED product , Oslon Black Flat for automotive frontlighting systems. Equipped with state-of-the-art chip and packaging technology and a ceramic converter, this new LED product from the famous Oslon Black series is a high-performance light source for automotive applications. It offers high light output even at high currents, uniform distribution of light, thermal stability and particularly good contrast for seeing and being seen. Oslon Black Flat had its premier as a prototype at ISAL 2011 and is available now. Light sour...
Continue reading
2012-09-20

Japanese Combines Dye-sensitized Solar Cells With LED Lamp

Lately, Nissha Printing Co Ltd has developed a lighting apparatus using dye-sensitized solar cells (DSSCs) and started to sell it. It is the first time that a DSSC developed and manufactured in Japan has been commercialized. The lighting apparatus, "Akarie," stores electricity generated with the DSSCs during daylight hours in a rechargeable battery. And the electricity is used to power an LED lamp during nighttime hours. The Akarie is made by using DSSCs on the top of a case that measures 200 x 200 x 85mm and weighs 3.7kg and placing a rechargea...
Continue reading
2012-09-19

Dataton and Show Sage bring WATCHOUT to LDI 2012

Linköping, Sweden, 18 September 2012:Dataton and WATCHOUT™ Premium Partner for North America, Show Sage, return to LDI 2012 On booth 442, the latest features of WATCHOUT multi-image display and presentation software will be demonstrated. The new features include interactivity, video streaming, live presentation, 3D stereo display and multiple output display. Dataton and Show Sage will also sponsor the Projection Master Classes taking place during the show on 17 and 18 October. Jim Testa, President of Show Sage explains: “LD...
Continue reading
2012-09-18

O2Micro Introduces New Isolated Step-Dimming Driver

O2Micro® International Limited has added new isolated step-dimming driver OZ8027A to its Free DimmingTM technology and Lighting product portfolio. O2Micro's patented Free Dimming technology enables LED bulbs to dim using any on/off switch, thus eliminating cost, installation and compatibility problems associated with traditional incandescent dimmers. Free Dimming technology works with any on/off switch, including wall toggles, paddle switches, pull cords, rotary switches and other types of on/off switches commonly found on walls, extension cords and table/desk...
Continue reading
2012-09-14

AZZURRO Launches 150 mm GaN-on-Si LEDs Templates

The easy migration of LED manufacturing to GaN-on-Si is described in a White Paper released by AZZURRO. Utilizing the company’s 150 mm templates the advantages of GaN-on-Si can be gained after very short design-in times. The White Paper outlines technical hurdles to be overcome when migrating to GaN-on-Si, covers key achievements possible when using the right technology, details the advantages for the move to GaN-on-Si obtainable with templates and shows development solutions to the LED epitaxy engineer. In detail data of GaN-on-Si products is rev...
Continue reading
2012-09-13

Seoul Semiconductor’s Acrich2 module of 100 lm/watt Starts Volume Production

Seoul Semiconductor’s latest Acrich2, AC LED module, which performs at 100 lm/watt is now available for volume production. And the company says this Acrich2 AC LED module will help the performance of the power grid. Acrich2 provides lighting designers with a high efficacy light source which also has a high power factor, and improved Total Harmonic Distortion (THD) performance. In traditional solid state lighting solutions, additional components and costs are required to provide an offline driver solution with acceptable dimming performance. Seoul Semi say...
Continue reading
2012-09-12

New Relight Assembly Kits from Lithonia Lighting

Acuity Brands Expands Portfolio of LED Renovation Solutions with the Introduction of VTLED Relight Assembly Kits from Lithonia Lighting Long-lasting LED technology results in reduced maintenance and disposal costs. The Lithonia Lighting® VTLED Relight assembly kits from Acuity Brands, Inc. (NYSE: AYI) feature long-lasting LEDs with a service life of up 50,000 hours, reducing maintenance requirements and disposal costs compared to conventional lighting. The VTLED kits' advanced LED light engine and driver consume less energ...
Continue reading
2012-09-10

Samsung and LG Competes in 55-inch OLED TVs at IFA 2012

Samsung and LG exhibited 55-inch OLED TVs at IFA 2012. This is the first time that they have been exhibited at a trade show in Europe. LG showed 3D video with special glasses and emphasized the slimness of a panel part (4mm). Starting by releasing the 55-inch full-HD (1,920 x 1,080-pixel) TV within 2012, LG Electronics plans to launch a 4k2k (3,840 x 2,160-pixel) OLED TV with a size of 60 inches or larger in 2013. "We expect that the price of the TV will be about 10,000 to 13,000 euro (in Europe)," the company said. Samsung showed...
Continue reading
2012-09-10

Sharp Designs LED Dining Light

Lately, Sharp has announced four kinds of the "LED Dining Light" LED lighting apparatus, designed for dining rooms. The new lamp has a design like a plate floating in the air. There are two type of the lamp, the rectangular "Round Square" type and the circular "Circle" type. The Round Square type comes in two models: one is for four-seat tables, and the other is for six-seat tables. And the Circle type is available as a model on which leaves are seen when it is on in addition to a normal model. As in the case of the LED b...
Continue reading
2012-09-05

Green House to Release LED Lantern Powered Only by Water, Salt

Green House Co Ltd is to release an LED lantern"GH-LED10WBW," that generates electricity with water and salt in mid-September 2012.   The lantern emits light when water and salt are put in the lantern, so it  does not require a dry cell or rechargeable battery. It can continuously generate electricity for eight hours per charge of water. To use the LED lantern, 350ml of saline water containing 16g of salt is made by using a dedicated water bag. When the saline water is put in the lantern, it functions as an electrolyte with a magnesium (Mg) ro...
Continue reading
2012-09-05

Cree Offers 4H Silicon Carbide Epitaxial Wafers Featuring Very Low Basal Plane Dislocation

Cree, Inc. announces its latest silicon carbide (SiC) offering with low basal plane dislocation (LBPD) 100-mm 4H SiC epitaxial wafers.  This LBPD material exhibits a total BPD density of < 1 cm-2 in the epitaxial drift layer, with BPDs capable of causing Vf drift as low as < 0.1 cm-2.   This low BPD material further demonstrates Cree’s long-standing commitment to continuous improvement and investment in SiC materials technology. “Bipolar devices in SiC have long been held back by forward voltage degradation caused by the pres...
Continue reading
2012-09-04

Philips Lumileds Releases High-Voltage LUXEON H 50-2 LEDs

Philips Lumileds has released new high-voltage LUXEON H 50-2 LEDs, with a typical efficacy of over 800 LPW, bringing 27% more efficacy compared to the existing LUXEON H 50V LED. In addition,  the new product can offer 30% more luminous flux and increase lumens per watt by 10% than similar products. The lumen maintenance of LUXEON H 50-2 LEDs surpasses stringent ENERGY STAR requirements. Engineered for tight spaces, retrofit bulbs like the popular A19, the compact design and high-voltage architecture of LUXEON H50-2 allows more ...
Continue reading
2012-09-03

Canadian Firm Meaglow Makes Breakthrough on InGaN Layer for Green LEDs

Canadian firm Meaglow has made a breakthrough on a low temperature Migration Enhanced Afterglow film growth technique to produce a thick InGaN layer with strong yellow emission, for increasing the efficiency and lowering production costs of green LEDs and laser diodes. It is looking for collaboration opportunities to enhance the material properties required by industry for lighting, display, medical, and military applications and other uses. Meaglow's Chief Scientist K. Scott Butcher, says, "It's the brightest p-n junction I've ever seen in my life,...
Continue reading
2012-08-31

Cree Debuts 150-mm 4HN Silicon Carbide Epitaxial Wafers

Cree announces availability of high quality, low micropipe 150-mm 4H n-type silicon carbide (SiC) epitaxial wafers. Cree continues to lead the SiC materials marketplace in driving to larger diameters and this latest advancement lowers device cost and enables adoption for customers with existing 150-mm diameter device processing lines. 150-mm epitaxial wafers with highly uniform epitaxial layers as thick as 100 microns are available for immediate purchase. SiC is a high-performance semiconductor material used in the production of a broad range of lighting, power and communication ...
Continue reading
2012-08-31

Intematix’s Red Nitride LED Phosphor to be Its 18th U.S. Patent

Intematix Corporation announced that the United States Patent and Trademark Office (USPTO) has issued a notice of allowance for claims on its patent covering red nitride phosphor compositions used in LEDs. Intematix expects issuance of the patent by the end of 2012. Intematix’s patent application number 12/632,550, entitled “Nitride-based Red Phosphors” is expected to be the 18th U.S. patent issued to Intematix in the area of LED phosphors and the 71st U.S Patent overall.   “Our novel chemical formulation lowers the concentratio...
Continue reading
2012-08-30

Acuity Brands New Video Series: The Secret To Intelligent Lighting

Acuity Brands Premieres Smart + Simple Lighting Solutions Videos   Video series showcases the multiple benefits of integrated, intelligent lighting for indoor applications.   Acuity Brands, Inc. (NYSE: AYI) has produced a series of five videos exploring the practical integration of intelligent LED luminaires and digital controls for interior applications. The Smart + Simple Lighting Solutions video series provides insight on how lighting with embedded controls can be easily tailored to a specific application, while monitoring and responding to the imm...
Continue reading
2012-08-30

Philips Lights up New Zealand’s Premier Sports with Colored Lighting

Royal Philips Electronics announced that its lighting up Eden Park, New Zealand’s premier sports ground with energy efficient lighting.  All over the world, our highly efficient lighting solutions turn stadia into iconic ‘theaters of dreams’ while delivering the best possible experience for people in and around the arena. Philips was asked to provide a floodlighting solution that would work for both rugby and cricket as each has different lighting needs. Philips was also asked by Eden Park Trust to present a high-impact way of illuminating the new sout...
Continue reading
2012-08-30

The 2013 Mustang GT Features OSRAM’s LED System Fog Lamps

OSRAM Automotive Lighting has debuted its LED JOULE® module on a popular and much-anticipated vehicle: the 2013 Mustang GT. The Mustang GT features the first LED fog lamp in the US based on OSRAM's standardized LED system. The grille-mounted hybrid reflector-projector system complements the Mustang's styling DNA. It is the highest volume LED forward lighting application in the North American market. The light source comes from a common OSRAM LED platform – demonstrating scalability across different applications an...
Continue reading
2012-08-30

Cree Announces the EDGE® High Output LED Series Delivering Game-Changing Performance and Savings

Latest Innovation Integrates Precise Optical Control, Exceptional Color Quality and Fast Payback Cree, Inc. (Nasdaq: CREE) introduces THE EDGE® High Output (H.O.) Area and Flood Light LED luminaires. Capable of replacing high output sources of the past such as 1000 watt metal halide and using 50 percent less energy in most applications, the new luminaire features more than 20 optical configurations. Among them is a new FrontlineOptic™ technology designed specifically for auto dealerships. THE EDGE H.O. luminaire delivers brilliant ...
Continue reading
2012-08-29

SemiLEDs completes LM80 with Integrated Service Technology

SemiLEDs leads the packaging manufacturers and became one of the first to pass a third party LM-80 test in Taiwan, performed by IST, required by Energy Star. SemiLEDs (Nasdaq: LEDS), with cooperation of Integrated System Technology(IST), is proud to announce that its S35 product line has successfully completed the requirements of the stringent 6000 hour lumen maintenance test (LM-80) and the results showed an extrapolated lifetime of up to 50,000 hours. SemiLEDs’ S35 series is the first product to pass the LM-80 after IST’s received t...
Continue reading
2012-08-29

Master-Planned Community Masters Energy-Saving Street Lighting with GE Evolve LED Fixtures

When Lake Nona pursued a vision to line its Southeast Orlando streets with new lighting, the 7,000-acre, master-planned community needed to match exacting aesthetic guidelines to leading-edge technology. Community leaders found their answer in GE Lighting’s Evolve™ LED Contemporary Twin Support Post Top and Evolve LED Roadway fixtures. Combined, the energy-saving street lighting fixtures will consume approximately 253,000 fewer kilowatt hours (kWhs) of electricity a year as opposed to traditional high-intensity discharge (HID) lighting – a $27,00...
Continue reading
2012-08-29

Historic Building Reduces Energy Costs With Acuity Brands Relight Kits

New indoor ambient lighting saves energy, improves work environment and enhances aesthetics in 381,000-square-foot Rose Building – corporate headquarters of Medical Mutual of Ohio. Acuity Brands, Inc. (NYSE: AYI), a leading provider of   comprehensive, energy-saving lighting solutions, announces that its Lithonia Lighting® high-performance volumetric Relight kits were installed in the corporate headquarters of Medical Mutual of Ohio located in the historic Rose Building in Cleveland, Ohio. The extensive lighting renovation project was comple...
Continue reading
2012-08-28

Philps Lumileds: LUXEON Z Power LEDs Offer Highest Lumen Density in Smallest Package

Philips Lumileds has launched the industry’s smallest high-power LED power LED package. LUXEON Z enables a level of customizability in luminaire design that, up to now, had been unattainable. Designers can now use the new, ultra-compact, un-encapsulated LEDs to create countless packaging, optical configurations and lighting design from 440-670 nanometers, including white, the LUNXEON Z offers the industry’s highest commercially available lumen density. The new LUXEON Z allows for integrated approaches that break today’s paradigms in ...
Continue reading
2012-08-27

Kyoto University Develops Transparent Paper for OLED Substrate

According Tech-On.com, Kyoto University’s professor Hiroyuki Yano, has added resin, etc to paper or its material (pulp) to make transparent paper. This breakthrough was announced at the New Technology Presentation Meetings, which the university organized Aug 24, 2012, in Tokyo. Yano expects that the new technologies will be applied to transparent OLED substrates, substrates of organic thin-film photovoltaic (PV) cells, electronic paper, materials for car windows, packaging containers, etc. Cellulose nanofibers, which constitute pulp, have a width of 10-20nm ...
Continue reading
2012-08-24

Indoor Spaces Speak in New Accents with LED Architectural Lighting from GE Lighting Solutions

Lighting designers, specifiers and property managers can shape indoor spaces in engaging new ways with GE Lighting's LED Architectural Lighting portfolio. New GE LED Accent, Tetra® PowerGrid and GE LED Wall Washer lighting systems add rich layers, bold backdrops and dramatic accents to retail shops, hotels, offices, restaurants, and a variety of other commercial spaces. "Lighting evokes emotion in its subtle sophistication," said Sarah Truman, GE Lighting Architectural LED Lighting Product Manager. "What we've done here is...
Continue reading
New XLamp® S Line LEDs enhance growth, last longer, lower energy costs Horticulture and other forms of agricultural lighting require application-tuned ratios of spectral content, high efficacy and long lifetimes. Whether you are interest... READ MORE
Cree LED delivers superior brightness, light quality and efficiency for portable applications. Our XLamp® LEDs are ideally suited for torch, flashlight, tactical flashlight, head lamp, bike light, weapon light and lantern portable applicat... READ MORE