Asahi Kasei and Nara Medical University Confirm 226 nm UVC LED Efficacy Against SARS-CoV-2 and Verify Reduced Effect on Animal Skin Cells

News Source: 


Figure 1 and Figure 2 references indicating the efficacy of 226 nm UVC LEDs against SARS-CoV-2, the virus that causes COVID-19. (Graphic: Business Wire)


Figure 3, Figure 4, and Figure 5 references in the release that show the experimental flow and the evaluation of the results on animal skin cells. (Graphic: Business Wire)
 

GREEN ISLAND, N.Y. & TOKYO--()--Asahi Kasei announces the results of joint research with Nara Medical University regarding the efficacy of 226 nm ultraviolet-C (UVC) LEDs in the inactivation of the coronavirus (SARS-CoV-2) that causes COVID-19, and its effects on animal skin cells. This is the first study in the world conducted with LEDs of this wavelength, and the results confirm that the 226 nm UVC LEDs are able to quickly inactivate SARS-CoV-2 while having significantly less effect on animal skin cells than 270 nm UVC LEDs.

Combating Pathogens with UVC Light
 
The inactivation (killing) of viruses and other pathogens using UV light rather than chemical disinfectants has drawn greater attention with the COVID-19 pandemic. Nevertheless, it has been necessary to prevent light from conventional mercury UV lamps (254 nm) and UVC LEDs (260–280 nm) from directly irradiating human skin due to risk of harmful effects. In contrast, UV excimer lamps with a wavelength of 222 nm were introduced last year showing negligible effect on the human body. However, LEDs are more compact and allow greater flexibility in design, have less risk of breaking, and have a quicker startup time than traditional lamps, opening up new potential for smaller, safer, and more responsive applications of UVC light.
 
Crystal IS, Inc., an Asahi Kasei company, has commercialized Klaran™ UVC LEDs in the 260–270 nm wavelength range, and is now supporting the advanced research by Asahi Kasei to reach shorter wavelengths. Recently, Asahi Kasei’s Corporate Research & Development was able to create 226 nm UVC LED prototypes, and tests were conducted for these LEDs regarding their efficacy for inactivating SARS-CoV-2 as well as their effects on animal skin cells.
 
About the Tests
 
One hundred of the 226 nm UVC LEDs were placed on a panel in a 10 × 10 array as shown in Figure 1. For comparison, a similar array of 270 nm UVC LEDs was also prepared. All of the UVC LEDs used in this study were created from the proprietary aluminum nitride (AlN) substrate and pseudomorphic aluminum gallium nitride (AlGaN) technology of Crystal IS.
  1. 226 nm UVC LED Efficacy for Inactivating SARS-CoV-2
    Liquid containing viable SARS-CoV-2 was injected into a Petri dish and then dried. Panel arrays of 226 nm and 270 nm UVC LEDs were activated at the same output (440 μW/cm2). Afterwards, the virus was collected, and the amount of contagion was measured by the plaque technique*1. The results, shown in Figure 2, indicate that in approximately 6 seconds, 99.9% of the virus was inactivated by both 226 nm and 270 nm UVC LEDs.
     
  2. Evaluating the Effects on Animal Skin Cells
    An additional experiment was conducted on mouse skin cells to estimate the damage that 226 nm UVC LED light has on animal skin compared with 270 nm light. Figure 3 shows the flow of the experiment. The mouse skin cells were arranged in two layers which were then exposed to either 226 nm or 270 nm UVC LED light at a dosage of 100 mJ/cm2 and 500 mJ/cm2. After the exposure, the upper layer of the cells was removed and the relative fraction of living cells in the bottom layer was evaluated by measuring the absorbance (optical density) after applying an MTT reagent*2 dye to the cells on the bottom layer. The dark colored dye indicates the amount of living cells that remain. The results shown in Figure 4 and Figure 5 indicate that the 226 nm UVC LED light had little to no effect at 100 mJ/cm2, and even at 500 mJ/cm2 there was significantly less effect on the cells of the bottom layer compared to that of the 270 nm UVC LED light.
Result Overview
 
The above results indicate that 226 nm UVC LEDs can quickly inactivate SARS-CoV-2 while having significantly less effect on animal skin cells compared to the current generation of 270 nm UVC LEDs for disinfection. This suggests the possibility that 226 nm UVC LEDs may be safely used to disinfect hands or objects where there are people nearby. Moving forward, further advancements in technology will be necessary before the power of the light emitted from 226 nm UVC LEDs can be improved enough for commercialization. Continued research development by Asahi Kasei is progressing to make this possible.
 
Additional Information
  • All the biological experiments were conducted on the campus of Nara Medical University in Bio Safety Level 3 (BSL3) testing facilities under appropriate means to safely contain the active virus. Furthermore, airborne viruses or their effects on humans were not tested.
  • Strain of novel coronavirus tested: SARS-CoV-2; 2019-nCoV JPN/TY/WK-521
*1 Plaque technique: A method of measuring virus volumes after the degeneration of virus infected cells.
*2 MTT reagent: Tetrazolium salt. Becomes colored when enzymes within the mitochondria are deoxidized indicating that the cells are still viable.
 
About Asahi Kasei
 
The Asahi Kasei Group contributes to life and living for people around the world. Since its foundation in 1922 with ammonia and cellulose fiber businesses, Asahi Kasei has consistently grown through the proactive transformation of its business portfolio to meet the evolving needs of every age. With more than 40,000 employees around the world, the company contributes to a sustainable society by providing solutions to the world's challenges through its three business sectors of Material, Homes, and Health Care. Its health care operations include devices and systems for acute critical care, dialysis, therapeutic apheresis, transfusion, and manufacture of biotherapeutics, as well as pharmaceuticals and diagnostic reagents. For more information, visit www.asahi-kasei.com.
 
About Crystal IS
 
Crystal IS, an Asahi Kasei company, is a pioneer in the development and commercialization of UVC LEDs based on its proprietary Aluminum Nitride substrate technology. Devices grown on Aluminum Nitride can more effectively (technically and economically) emit at deeper ultraviolet (UVC) wavelengths than devices grown on sapphire. Crystal IS products are used to produce high performance UVC LEDs for disinfection and environmental monitoring in a variety of applications that enhance and sustain life and living around the world. www.cisuvc.com
 
 

TrendForce 2021 Deep UV LED Application Market and Branding Strategies
Release: 01 May 2021
Language: Traditional Chinese / English
Format: PDF

If you would like to know more details , please contact:

Global Contact:
 
ShenZhen:
Grace Li
E-mail : Graceli@trendforce.com
Tel : +886-2-8978-6488 ext.916
  Perry Wang
E-mail : Perrywang@trendforce.cn
Tel : +86-755-82838931 ext.6800
Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Tokushima, Japan - 6 March 2024: Nichia, the world's largest LED manufacturer and inventor of the high-brightness blue and white LED, has started mass production of the new UV-B (308nm) and UV-A (330nm) LEDs in its popular 434 Series packa... READ MORE

New XLamp® S Line LEDs enhance growth, last longer, lower energy costs Horticulture and other forms of agricultural lighting require application-tuned ratios of spectral content, high efficacy and long lifetimes. Whether you are interested... READ MORE