Swiss Researchers Develop Molybdenite LED that Doubles as Solar Cell

Researchers at the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland, have discovered the electronic potential of molybdenite (MoS2) by creating diodes that can both emit light and absorb to create electricity.

Molybdenite has a few surprises still up its sleeve. After having used it to build an electronic chip, a flash memory device and a photographic sensor, EPFL professor Andras Kis and his team in the Laboratory of Nanoscale Electronics and Structures (LANES) is continuing his study of this promising semi-conductor. In research recently published in the journal ACS Nano, they have demonstrated the possibility of creating light-emitting diodes and solar cells.

The new molybdenite device acts as both an LED and a solar cell. (photo courtesy of EPFL) 

The scientists built several prototypes of diodes – electronic components in which voltage flows in only one direction – made up of a layer of molybdenite superposed on a layer of silicon. At the interface, each electron emitted by the MoS2 combines with a “hole” – a space left vacant by an electron – in the silicon. The two elements lose their respective energies, which then transforms into photons. “This light production is caused by the specific properties of molybdenite,” explains Kis. “Other semi-conductors would tend to transform this energy into heat.”

Working in tandem

Even better, by inversing the device, electricity can be produced from light. The principle is the same: when a photon reaches the molybdenite, it ejects an electron, thus creating a “hole” and generating voltage. “The diode works like a solar cell,” says Kis. “Our tests showed an efficiency of more than 4%. Molybdenite and silicon are truly working in tandem here. The MoS2 is more efficient in the visible wavelengths of the spectrum, and silicon works more in the infrared range, thus the two working together cover the largest possible spectral range.”

The scientists want to study the possibility of building electroluminescent diodes and bulbs. This discovery could, above all, reduce the dissipation of energy in electronic devices such as microprocessors, by replacing copper wires used for transmitting data with light-emitters.

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Tokushima, Japan - 6 March 2024: Nichia, the world's largest LED manufacturer and inventor of the high-brightness blue and white LED, has started mass production of the new UV-B (308nm) and UV-A (330nm) LEDs in its popular 434 Series packa... READ MORE

New XLamp® S Line LEDs enhance growth, last longer, lower energy costs Horticulture and other forms of agricultural lighting require application-tuned ratios of spectral content, high efficacy and long lifetimes. Whether you are interested... READ MORE