LEDinside: Market Value of Automotive Headlamp LED in China is Expected to Reach US$1.21 Billion in 2022

Development Trend of Automotive LED

According to the latest report from LEDinside, a division of the market research firm TrendForce, 2018 Chinese Automotive Lighting Market Report- Passenger Car and Logistics Car Market Analysis, the market value of automotive headlamp LED in China is expected to reach US$1.21 billion in 2022, the highest among major automotive applications.

In terms of headlamp products, luminous density is one of the important indexes when choosing LED. As for the luminous flux of four-chip automotive headlight LED, products from OSRAM and Nichia could achieve 1200lm, which is above 215 lm/mm2 when converting into luminous density. The larger the luminous density, the stronger the brightness. In terms of optical design, the maximum brightness of module center is the highest. This way, it is easier to increase the optical efficiency of module. Moreover, diversity of head lamp LED market is increasing, multiple manufacturers have launched single-chip LEDs used in low beam.

As for matrix head lamp, the light source is required to be equipped with features including higher extraction efficiency of LED luminous flux, higher general efficiency of optical system, better optical uniformity, simpler and more flexible optical structure design, etc. Furthermore, only with smart control system can it show its best performance.

Development Trend of Automotive Driver IC

In terms of automotive driver IC, in view of typical automotive IC driver based on single LED or multiple LEDs, one DC/DC converter is basically needed to accurately provide fixed LED current for uniform brightness and color saturation. The converter must also protect LED from the damage by substantial voltage changes during driving. The design of DC/DC converter must be optimized according to the amount and type of LED as well as its functions in various applications like headlamp, tail light, turn signal, reading light, dashboard backlight and CID.

However, driver IC affects the quality of DC/DC converter, hence automotive driver IC is different from un-automotive products in reliability, safety, EMI (electromagnetic interference), heat dissipation and cost. Due to higher requirements, the challenge of automotive driver IC is also harder. For instance, with respect to reliability, automotive driver IC should ensure system reliability rather than pursue chip reliability. Equipped driver IC with LED open/short circuit and overcurrent & overheat protection functions so as to ensure driver stability. As for safety, it’s extremely important for driver IC to require error detection in operation and the reliability of data transmission structure. In regard to EMI, as driver IC should lower the complexity of EMI solution and circuit structure also need to be simplified, driver IC with integrated multi functionality becomes a key factor.

2018 Chinese Automotive Lighting Market Report- Passenger Car and Logistics Car Market Analysis


Release: 31 May 2018


Language: Chinese / English


Format: PDF


Page: 213

Chapter I 2018 Chinese Automotive LED Market Scale Analysis

2018 Chinese Automotive Lighting Market Report- Definition
2018-2022 Chinese Automotive Lighting LED Market Value Analysis

Part I Chinese Conventional Passenger Car Market

Chinese Car Market- Conventional Passenger Car
Chinese Conventional Passenger Car LED Penetration Rate Analysis- Exterior Lighting
Chinese Conventional Passenger Car LED Penetration Rate Analysis- Interior Lighting
Chinese Conventional Passenger Car LED Market Value- Exterior Lighting
Chinese Conventional Passenger Car LED Market Value- Exterior Lighting- OE v.s. AM / PM Market
Chinese Conventional Passenger Car LED Market Value- Interior Lightin
Chinese Conventional Passenger Car LED Market Value- Interior Lighting- OE v.s. AM / PM Market

Part II Chinese New Energy Passenger Car Market

Chinese Car Market- New Energy Passenger Car
Chinese New Energy Passenger Car LED Penetration Rate Analysis- Exterior Lighting
Chinese New Energy Passenger Car LED Penetration Rate Analysis- Interior Lighting
Chinese New Energy Passenger Car LED Market Value- Exterior Lighting
Chinese New Energy Passenger Car LED Market Value- Interior Lighting

Part III Chinese Conventional Box Truck Market

Chinese Car Market- Conventional Box Truck
Chinese Conventional Box Truck LED Penetration Rate Analysis- Exterior Lighting
Chinese Conventional Box Truck LED Penetration Rate Analysis- Interior Lighting

Chapter II Automotive Lighting Products Design and Trend

Six Key Factors of LED Automotive Module

Part I Passenger Car

1.1 Automotive Exterior Lighting Products Design and Trend

Threshold for Entering Automotive Supply Chain
Guidelines for Developing LED Automotive Lighting Module
Development Process of LED Automotive Lighting Module
Design of LED Automotive Lamps
Development Trend of LED Automotive Lamps

1.2 Automotive Interior Lighting Products Design and Trend

Dashboard/ Cluster
CID
Entertainment Display
Head Up Display

1.3 Infrared Sensing in Automotive Market

Car Sensor- Instant Driver Monitoring to Avoid Accident
Driver Monitoring and Warning System Becomes the Developing Focus of Major Car Makers
IR Market Share in Driver Monitoring and Gesture Control Panel
Driver Monitoring and Gesture Panel Supply Chain Analysis
Gesture Sensor in Exterior Automotive Market
Infrared Sensor in Automotive Market– Applications

Part II Box Truck

Box Truck Market Trend
Definition of Box Truck
Light Sources of Box Truck
Design Trend of LED Products for Box Truck
LED Average Usage Trend of LED Application in Box Truck during 2018-2022

Chapter III Policy and Industry Regulation

Double Integral Policy for New Energy Vehicle
Subsidy Policy for New Energy Passenger Vehicle and the Trend
Subsidy Policy for New Energy Logistics Vehicle and the Trend
Strategies of Chinese New Energy Logistics VehicleLaws & Regulations and Threshold for Automotive OE Products
Reliability Testing Standard for Automotive Products
Chinese Automotive Original Equipment Market Requirements
Chinese Automotive Original Equipment Market Standards
Chinese Automotive Aftermarket Demand- Two U.S. Certification Organizations Enter the Chinese Market
Chinese Auto Lamp Certification Requirements
Auto Lamp Market Optical Regulations and Characteristics – High/low Beam, Front Fog Light, DRL

Chapter IV Chinese Automotive Lighting Supply Chain Analysis (Passenger Car)

Top Ten Automobile Manufacturers Supply Chain- Joint Venture Manufacturers
Top Ten Automobile Manufacturers Supply Chain- Wholly-Owned Manufacturers
Automobile Supply Chain- From Perspective of Module Manufacturers
Local Manufacturers Actively Build Automotive Value Chain

Chapter V Automotive Module and Lamp Players

26 Automotive Module and Lamp Players Company Profile

Revenues (Global or China) in 2016 & 2017
Revenue Distribution
Production Site
Main Lamp Products
Market Distribution
Business Model
LED Purchasing Decision Power
Key Customers (Passenger Car)

Chapter VI Chinese Automotive LED Manufacturer Movement

12 Automotive LED Manufacturers Company Profile
Highlight of the Chapter

Global and China Automotive Revenue in 2016 / 2017
Chinese Market Development Strategies
Automotive LED Product Specifications

Contact Us:

Taipei:

 

Joanne Wu        
joannewu@trendforce.com
+886-2-8978-6488 ext. 912

Grace Li
graceli@trendforce.com
+886-2-8978-6488 ext. 916

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Tokushima, Japan - 6 March 2024: Nichia, the world's largest LED manufacturer and inventor of the high-brightness blue and white LED, has started mass production of the new UV-B (308nm) and UV-A (330nm) LEDs in its popular 434 Series packa... READ MORE

New XLamp® S Line LEDs enhance growth, last longer, lower energy costs Horticulture and other forms of agricultural lighting require application-tuned ratios of spectral content, high efficacy and long lifetimes. Whether you are interested... READ MORE