AR Micro Projection Product of Micro LED Will Account for up to 18% in 2025, Says LEDinside

According to the latest report, 2Q18 Micro LED Next-Generation Display Technology Market Report- Micro Projection AR & VR Market Trend and Analysis, from LEDinside, a division of the market research firm TrendForce, LEDinside analyzes the light sources of micro projection. Since Micro LED has high brightness and is power-saving, it can produce miniature module. After Micro LED technology becomes mature, it will be the new mainstream for display technology.

Augmented Reality, commonly abbreviated as AR, is to combine virtual world on the display with real world and make it interactive through the position of the camera, actuary angle and image analysis technology. AR market will stay focused on commerce- and education-related applications. In the future, it will mainly show in the market in the product form of smart eyewear. LEDinside projected AR product shipment is expected to stand at 4 million sets in 2025, amongst those, Micro LED penetration rate is expected to reach 18%.

What are the advantages of using Micro LED in AR products? Firstly, AR product poses much higher requirements on size and weight to achieve comfortable user experience. Therefore, the projection technologies are based on micro-display that integrates all pixels showing image or video into monolithic IC module. Projection technologies including LCOS and DLP need additional light source to produce images, while Micro OLED is directly self-luminous with the pixels on IC, which can reduce the volume of light source and the overall weight, but its brightness is susceptible to the external ambient light, resulting in subdued display contrast. Compared Micro LED with Micro OLED, which is also self-emissive, has better brightness and contrast ratio.

However, there are a variety of challenges on using Micro LED in AR products at the current stage. Due to close distance, the pixel of the display has to be smaller and PPI must reach more than 2000 to avoid the problem of low resolution. Hence, in terms of the development of Micro LED technology, players still need to overcome the challenges on Micro LED epitaxy, chip size, transfer technology, wafer bonding, color conversion and inspection, etc.

According to LEDinside analysis, on a display module of 1’’, there are various resolutions. The corresponding chip dimension will also change, which adds to the difficulties during product transfer processing. Considering the yield rate is not high at the initial stage, the estimated cost will increase as rising resolutions. With transfer technology of UPH (Unit Per Hour) of 500K, the price of a 16K display will be 10 times higher than that of a 2K one. If with transfer technology of UPH 20KK, then the price variance will be of 5 times.

   

LED + DLP / LCOS

Micro OLED

Micro LED

AR

Advantages

High Brightness

Low Cost

High Resolution

Fast Reaction Speed

Lightweight

Power Saving

High Brightness

High Contrast Ratio

High Resolution

Fast Reaction Speed

Lightweight

Power Saving

Disadvantages

Low Resolution

Slow Reaction Speed

Heavy

High Power-Consuming

Low Brightness

High Cost

High Cost

Hard Manufacturing Process

Low Yield Rate

Appendix: Major Transfer Technology Analysis

LEDinside 2Q18 Micro LED Next-Generation Display Technology Market Report- Micro Projection AR & VR Market Trend and Analysis

Micro Projection Definition and Market Scale

  • Micro Projection and Display Market Demand
  • Micro Projection and Display Definition
  • Micro Projection and Display Application
  • AR Manufacturer Trend
  • AR Market Estimation and Micro LED Usage Volume
  • VR Manufacturer Trend
  • VR Market Estimation and Micro LED Usage Volume

AR Micro Projection Technology

  • AR Application
  • AR Display Technology Analysis
  • AR Design Requirement
  • AR Product Potential Player List
  • AR Display Technology - DLP
  • AR Display Technology - LCOS
  • AR Display Technology - Micro OLED
  • AR Display Technology- Micro LED (Projection Solution)
  • AR Display Technology- Micro LED (Display Solution)
  • AR Display Technology- Micro LED (Automotive HUD)
  • AR Display Application Fields

VR Display Technology

  • VR Applications
  • VR Design Requirement
  • VR Display Technologies
  • VR Display Technology Analysis
  • VR Product Potential Player List
  • VR Display - LCD
  • VR Display- Micro OLED
  • VR Display- Micro LED
  • VR Display Application Fields

Micro LED Technology Trend in AR & VR

  • Future Development Direction
  • AR & VR Light Source Development Trend
  • Micro LED Solution Results in Reduced Size and Weight for AR Micro LED Product Application and Development Process
  • AR & VR Display Chip Size Development Trend
  • LED Epitaxy Challenge Analysis
  • LED Epitaxy Equipment Analysis
  • Transfer Technology Difficulty Analysis
  • Wafer Bonding Difficulty Analysis
  • Coloring Difficulty Analysis
  • Inspection and Repair Challenge Analysis

Cost Analysis

  • Analysis on Cost of AR Light Source
  • Analysis on Cost of VR Light Source

Micro LED Market Forecast

  • 2018-2025 Micro LED Market Volume for AR & VR Application

Appendix: Micro LED Transfer Technology

  • Apple (LuxVue)
  • Samsung
  • X-Celeprint
  • Sony
  • eLux
  • Uniqarta
  • QMAT
  • KIMM

 

Customized Report / Consulting Service: LEDinside Keeps the Right to Adjust the Contents, Depending on Industry Development Trend.

LEDinside provides customized reports and consulting service, please call or email us.

If you would like to know more details, please contact:

Taipei:

 

Joanne Wu        
joannewu@trendforce.com
+886-2-8978-6488 ext. 912

Grace Li
graceli@trendforce.com
+886-2-8978-6488 ext. 916

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Tokushima, Japan - 6 March 2024: Nichia, the world's largest LED manufacturer and inventor of the high-brightness blue and white LED, has started mass production of the new UV-B (308nm) and UV-A (330nm) LEDs in its popular 434 Series packa... READ MORE

New XLamp® S Line LEDs enhance growth, last longer, lower energy costs Horticulture and other forms of agricultural lighting require application-tuned ratios of spectral content, high efficacy and long lifetimes. Whether you are interested... READ MORE