LED Encapsulation Process

Encapsulation is generally adopted in packaging of lamp-LEDs. The encapsulation procedure is to pour liquid epoxy into the LED moulding chamber first, and then insert the LED bracket that has undergone the press welding, then put the mould into the oven, and the LED gets shaped when the epoxy solidifies.

The procedure of encapsulation sounds rather simple, while the following points should be paid attention to:
1. To fit the die bars onto the aluminum ship in a certain direction, drift the dust, and then put the mould into the 125℃ oven for 40 minutes for warm-up.
2. Prepare the required quantity of epoxy, put the epoxy into the 45℃oven for 15min for defoaming.
3. pour the epoxy into the mould, pre-bake the mould (3φ to 5φ products at 125℃ for 60 minutes; 8φ to 10φ products at 110℃ for 30 minutes and then at 125℃ for 30 minutes)
4. Release the product from the mould, bake at 125℃ for 6 to 8 hours.

If the encapsulation process is not properly conducted, the following are possible results:
1.Bracket inclined to one side, inserted too deep or too shallow, upside down, stained with epoxy, yellowed(oxidation, high baking temperature or long baking time)
2.Air bubbles in bowl shape, pearl shape, thread shape, or pinhole bubbles on the surface
3.Impurity, excess epoxy, insufficient epoxy, nebulization
4.Water mark on the epoxy surface, damage or crack of epoxy (aging glue or wrong ratio), yellowed epoxy (excessive ratio of A glue )

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Tokushima, Japan - 6 March 2024: Nichia, the world's largest LED manufacturer and inventor of the high-brightness blue and white LED, has started mass production of the new UV-B (308nm) and UV-A (330nm) LEDs in its popular 434 Series packa... READ MORE

New XLamp® S Line LEDs enhance growth, last longer, lower energy costs Horticulture and other forms of agricultural lighting require application-tuned ratios of spectral content, high efficacy and long lifetimes. Whether you are interested... READ MORE