Biomedical Sidney Research Campus Relit with Artistic Lighting

 

“Visual images” lined with iLight Plexineon White fixtures add excitement in the main floor elevator lobby, as well outside the elevators on each floor. (All photos courtesy of iLight)
Plexineon is installed in the wall and ceiling to create a 3D effect

Located in the shadow of Harvard University and the Massachusetts Institute of Technology (MIT), the Sidney Research Campus is a study in new thinking.

The three-building, 340,000-square-foot campus was formerly a dated-looking home to one large life sciences tenant. But a recent metamorphosis has transformed it into modern office and laboratory space for a variety of smaller biotech companies. To support the tenants’ breakthrough work, the firm Arrowstreet designed the common areas inside and out to be sleek and sophisticated. In one building, that includes using “visual images” lined with iLight Plexineon White fixtures. Installed so they are offset against the ceilings, the fixtures create a 3D effect in the main floor elevator lobby, as well outside the elevators on each of the building’s four floors.

The Design Challenge
“A big issue was how to make these long, L-shaped corner spaces fun and exciting,” says D. Schweppe, principal of Schweppe Lighting Design, Inc., which collaborated with Arrowstreet. “We talked about creating light slots, an idea the designer originally had conceived. They had imagined 2-inch slots. If we used Plexineon, we could get a much narrower profile, down to under 1 inch. We explained that the narrower width would provide more of a highlight than just a light fixture — a better fit with their concept of keeping things clean and elegant.”

The challenge was incorporating the fixtures into existing wood paneling. “There was a lot of coordination between iLight, the manufacturer’s representative, the general contractor, and the electrical contractor,” Schweppe says. “We needed to be sure everything was installed in the correct order: the ceiling support system, then the Plexineon fixtures, then the ceiling.”

“We built a mock up that further revealed ways to get the effect we wanted — where to place the drivers and how the fixtures would sit in relation to the panels. “We really wanted them to align or sit back, so there wouldn’t be flash off to the side — so we would actually have a line of light, not a blob.”

"A big issue was how to make these long, L-shaped corner spaces fun and exciting.”
 - D. Schweppe Principal, Schweppe Lighting Design, Inc.

The Plexineon Advantage
While lines of light were the goal, reflection was considered a plus because it would help create more dimension, Schweppe says. And the quality of the light is just as he expected, after using Plexineon successfully on several other projects.

iLight’s service was just as important this time around. Schweppe says, “iLight was very helpful in offering advice and coordinating how we would work within the support system – how to fit things into the channel to ensure the precision needed for the lines of fixtures to be consistent. They also provided the proper hardware to keep the depth consistent. That was a big advantage, and everyone is very pleased with the final result.”
 


It was a challenge to make the long, L-shaped corner spaces fun and exciting, while also incorporating the fixtures into existing wood paneling.

Plexineon's narrow profile was consistent with the design concept to keep things clean and elegant.

PROJECT DETAILS

Project: Biotech Commercial Building
Site: Cambridge, MA
Location: Interior Application
Product Use: Direct View
Owner: BioMed Realty Trust | www.biomedrealty.com
Lighting Design: Schweppe Lighting Design, Inc. | www.lightandhue.com
Architecture and Interior Design: Arrowstreet | www.arrowstreet.com
Product: Plexineon White 1X 3500
Length: 890 LF 271.3 Meters

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Tokushima, Japan - 6 March 2024: Nichia, the world's largest LED manufacturer and inventor of the high-brightness blue and white LED, has started mass production of the new UV-B (308nm) and UV-A (330nm) LEDs in its popular 434 Series packa... READ MORE

New XLamp® S Line LEDs enhance growth, last longer, lower energy costs Horticulture and other forms of agricultural lighting require application-tuned ratios of spectral content, high efficacy and long lifetimes. Whether you are interested... READ MORE