Austriamicrosystems introduces LED flash driver for digital cameras

Austriamicrosystems, a designer and manufacturer of high performance analog ICs, today announced the AS3645 LED flash driver. This inductive, ultra-small, high-efficiency single/dual LED flash driver offers 25 percent higher output current than existing equivalents. The higher flash power enhances picture and video quality especially in low light environments at the same system size.

The AS3645 inductive flash driver drives up to 1000 mA and can be used in single LED flash or double LED flash environments. The high-side current source works with up to 2x500 mA with two LEDs in serial configuration and up to 720 mA with one LED. When driving two LEDs in series, LEDs draw identical currents and provide output light matching and thermal dissipation. The AS3645 auto detects whether to employ single or dual LED mode and enables direct one-button flashlight mode. A number of safety features protect against circuit damage and improve test time, including programmable current limiting, auto test (LED open/short detection), overvoltage and undervoltage, overtemperature and automatic flash timeout timer for thermal LED protection during flash.

These features suit the needs of a camera phone flash, especially in smart phones and feature-phones. For other devices with cameras, including digital still cameras, camcorders and PDAs, the AS3645 flashlight driver is a perfect solution. Its high efficiency 2 MHz fixed frequency DC-DC boost converter with soft start allows small inductors and enables easy integration into noise sensitive RF systems. The high power LED flash current source can operate in flash, torch and assist (video) light mode. An additional current source drives an optional indicator LED. Control can be implemented through either the parallel interface mode to allow simple integration, or the I2C interface to allow more sophisticated control of all settings like currents and timings. The interface is selected by a dedicated pin (I2C/EN).

The AS3645 is available in a tiny WL-CSP package (3x4 balls 0.5 mm pitch, 2x1.6 mm) and has an operating temperature range of -30° to +85°C (ambient).

Price & Availability
Available in volume now, the price for the AS3645 is under $0.90 in 1000 piece quantities.

Technical Support
A demonstration board for the AS3645 inductive flash driver is available. Contact austriamicrosystems for price. In addition, the data sheet includes an applications section showing multiple modes of operation and interface.

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Tokushima, Japan - 6 March 2024: Nichia, the world's largest LED manufacturer and inventor of the high-brightness blue and white LED, has started mass production of the new UV-B (308nm) and UV-A (330nm) LEDs in its popular 434 Series packa... READ MORE

New XLamp® S Line LEDs enhance growth, last longer, lower energy costs Horticulture and other forms of agricultural lighting require application-tuned ratios of spectral content, high efficacy and long lifetimes. Whether you are interested... READ MORE