Innovation and Simplification:Curable Phosphor PSA Films Developed by FLORY Materials for CSP LED Manufacturing

 Curable Phosphor PSA Films designed for CSP LED high-volume manufacturing were successfully developed and mass-produced by FLORY Optoelectronic Materials Company in Suzhou of China after years of innovation and optimization. The pressure-sensitive nature of this Phosphor Film (PF) eliminates the usage of an extra-layer of PSA in between the phosphor sheet and the CSP chip (Figure 1). The use of Curable Phosphor PSA Films can significantly simplify the CSP packaging process, enhance reliability, improve yields and productivity, and reduce the cost of ownership. In addition, curable and thermally conductive silicone pastes T02-01 with excellent gap filling and high conductivity were successfully developed as well at FLORY Materials.  

Figure 1. Curable Phosphor PSA Films designed for CSP LED HVM can simplify packaging process and reduce BOM and COO. (Image: FLORY)

CSP (Chip Scale Package) LEDs have been the frontier in LED innovation in the last few years. The profound advantages of CSP, just to name a few, include the smaller form factor, higher lumen output, better thermals and reliability, lower cost, and ease of integration. Currently, CSP LEDs enter into applications such as smartphone flash lights, ultra-thin TVs backlighting, and automotive lightings. Industry insiders noted that once Chinese companies fully control the frontend and backend markets, it can be foreseen that CSP LED volume will soar in the near future.

Phosphor sheets are a key raw material in CSP LED manufacturing. Due to the high density of phosphor, sedimentation of phosphor in the resin matrix can cause uneven distribution and significantly distort the uniformity of the sheet. The patented curable phosphor PSA innovated by FLORY Materials demonstrated excellent CIE x/y uniformity and binning results (Table 1 and Figures 1). The current offerings include PF1 and PF2 series, which employed normal refractive index silicone resins and high refractive index silicone resins, respectively. Excellent adhesion and thermal stability were also observed (Tables 2-3).

Table 1.  Light color point consistency test results of CSP Curable Phosphor PSA PF1 products.

PF1 Film

CIE-x

CIE-y

Tc

Ra

average

standard deviation

average

standard deviation

PF1 #B84-15b

0.4199

0.0021

0.4064

0.0017

3326

84.7

PF1 #B84-55d

0.4230

0.0017

0.4101

0.0014

3297

84.2

PF1 #B84-85i

0.4245

0.0024

0.4113

0.0021

3278

84.3

Figure 2. The binning results of CSP Curable Phosphor PSA PF2 products.(Image: FLORY)
 
Table 2. Excellent adhesion results demonstrated by PF1 products.

PF1 Film

Phosphor Content (wt%)

AdhesionMPa

240C24h

240C24h (cycling to rt every 2h)

260C24h

260C24h (cycling to rt every 2h)

PF1 #B92-115a

60.5%

>0.140

>0.140

>0.140

0.115

PF1 #B88-134m

33.3%

>0.140

>0.140

>0.140

>0.140

 
Table 3. Excellent thermal resistance demonstrated by PF1 products.

Condition

PF1 #B92-115a

PF1 #B88-134m

Tc

Ra

Tc

Ra

240C 0h

2796

82.9

5814

72.1

240C 48h

2786

82.9

5841

72.3

240C 96h

2808

82.9

5823

71.7

240C 144h

2818

82.9

5853

71.9

240C 207h

2821

82.9

5826

71.8

240C 332h

2838

83.0

5819

71.7

 

In conventional CSP LED processes, an extra layer of PSA is utilized in the mass production and sandwiched in between the phosphor sheet and the LED chips. The addition of this extra PSA layer may have a negative impact, not only on the light output and light quality, but also on reliability. The major advantages of the Curable Phosphor PSA technology include: 1) higher light lumen output; 2) simplified process and higher productivity; 3) reduced BOM and lower COO, more environmental friendly.

The Curable Phosphor PSA offerings from FLORY Materials have high hardness (Shore D60) and full spectrum coverage (2000K、2700K、3000K、3500K、4000K、4500K、5000K、5700K、6500K) and backlighting. Tailor-made products are offered as well in order to meet customers' special needs. The Curable Phosphor PSA can also be used in Remote Phosphor Applications. What's more, the Curable Phosphor PSA can be stored, shipped, and operated at room temperature, unlike the refrigerated conditions from other phosphor film vendors.

Among the fierce competition in the CSP LED market, KUNSHAN SMILE Light Electronic Co. quickly emerges as one of the technology leader and showed off innovative technologies and products with enhanced quality. The current offerings include automobile lighting CSP, flash CSP, backlighting CSP, and dual-tone COB CSP. KUNSHAN SMILE has been working closely with FLORY Materials and quickly adopted the Curable Phosphor PSA in its production. By eliminating the conventional PSA layer, KUNSHAN SMILE is able to improve the light lumen output by six to ten percent and is swiftly catching up to the top tier CSP vendors. Comparison data with International Leaders on light lumen output are shown in Table 4.

Table 4. Light lumen output comparison among 1919 CSP Products.

Currently, FOM offers a variety of differentiated Si-based LED packaging materials, which include: 1) A05 products for COB; 2) Phosphor Precipitation Encapsulant A06 and H30 products; 3) phenyl silicone encapsulant H20 products for SMD; 4) Aqueous sulfur-corrosion resistant (anti-sulfidation) coating C16 products; 5) UV adhesives E02 with ultra low dielectric constant. More information can be found at:

  • FLORY Optoelectronic Materials Company
  • website: http://www.florymaterials.com ;Phone:+86-512-62891767
  • e-mail: support@florymaterials.com ;2694661061@qq.com
  • KUNSHAN SMILE Light Electronic Co., Ltd
  • website: http://www.smilelight.cn;Phone:+86-151-62632551
  • e-mail: dslgt@smilelight.cn  
 
Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Tokushima, Japan - 6 March 2024: Nichia, the world's largest LED manufacturer and inventor of the high-brightness blue and white LED, has started mass production of the new UV-B (308nm) and UV-A (330nm) LEDs in its popular 434 Series packa... READ MORE

New XLamp® S Line LEDs enhance growth, last longer, lower energy costs Horticulture and other forms of agricultural lighting require application-tuned ratios of spectral content, high efficacy and long lifetimes. Whether you are interested... READ MORE