Murata Develops Anti-Fuse Element for LEDs

Murata Electronics North America, an innovator in electronics and the largest global supplier of ceramic passive components, recently introduced an anti-fuse element for light emitting diodes (LEDs). Developed to control open defects in LEDs, Murata's anti-fuse device prevents the lowering of power supply voltage, typically observed in Zener diodes, which results in higher energy efficiency. Other key benefits include a simple and economical circuit design, the reduction of color unevenness and small size.

Reduced power consumption is one of the main reasons LED lighting fixtures are in demand. However, LEDs are typically connected in series and therefore are at risk of failure if a single LED becomes open. The solution is to re-route current flow around the open LED. Murata's new anti-fuse element is connected in parallel to a serial LED, allowing each LED to stay lit should one become open. This allows for uninterrupted and even light, reduced maintenance costs and increased energy efficiency. The company's anti-fuse element can be used in all LED lighting fixtures and is especially well suited for large outdoor lights that generally require more maintenance.

The anti-fuse element measures 1.0mm x 0.5mm x 0.5mm. However, 0.6mm x 0.3mm and 0.4mm x 0.2mm sizes are in development. The allowable current is 350mA with a nominal voltage of 4V and a trigger voltage of 20V. Before activation, the insulating resistance is 1MΩ and the resistance after activation is less than 3Ω. This new product is available in sample quantities for 40 cents and lead times are approximately eight to 10 weeks starting January 2010.

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Tokushima, Japan - 6 March 2024: Nichia, the world's largest LED manufacturer and inventor of the high-brightness blue and white LED, has started mass production of the new UV-B (308nm) and UV-A (330nm) LEDs in its popular 434 Series packa... READ MORE

New XLamp® S Line LEDs enhance growth, last longer, lower energy costs Horticulture and other forms of agricultural lighting require application-tuned ratios of spectral content, high efficacy and long lifetimes. Whether you are interested... READ MORE