Larson Electronics LLC Releases A New Class I, Division 2 Hazardous Area LED Light Fixture with a Motion & Day/Night Sensor

Not only are these hazardous area LED lights designed for extreme environments but, they also help to save on energy costs with their built in motion and day/night sensor.

Larson Electronics LLC, a leading industrial lighting company, announced the release of a new hazardous area LED light (HALP-48-2L-LED-DNMS) to be added to its expanding catalog of products this week. This LED light fixture has been designed as a lighting solution for hazardous work locations and features a built-in motion and day/night sensor for improved efficiency.

This hazardous area LED light fixture has been designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This Class I, Division 2 LED is constructed of non-corrosive materials and features eight plastic latches that secure the lamp cover to the housing. This helps to provide a firm lock against the poured in seal to prevent drips and water intrusion. This LED is UL 844 rated and Class I, Division 2 Groups A, B, C, D approved. This hazardous area LED also carries a UL 1598A outdoor marine rating and meets US Coast Guard specifications.

(Image:Larson Electronics LLC)

A built in motion and day/night sensor allows this LED to operate in on of several different modes. This fixture can be set to be motion activated, day/night activated or in a combination of motion sensing and day/night modes. This sensor is also highly adjustable and allows operators to modify the following settings: motion sensor sensitivity, motion sensor time-delay and the intensity output level of the fixture. The versatility of the motion and day/night sensor allows multiple units to be installed together, like in parking garages. For example, operators can set up a sequence of HALP-48-2L-LED-DNMS fixtures with alternating lights on separate circuits. The first circuit would have sensors set to a lower lux level than the fixtures on the second circuit.

This hypothetical setup would allow half the lights to come on as daylight began to fade and the rest of the lights would only come on once complete darkness had fallen. The fixtures could then be adjusted for motion sensing which would allow selected fixtures to power on when pedestrian or vehicle movement was detected and then turn off after an operator chosen interval to conserve energy.

"If you're looking for big savings then look no further," said Rob Bresnahan, CEO of Larson Electronics LLC."Not only are these hazardous area LED lights designed for extreme environments but, they also help to save on energy costs with their built in motion and day/night sensor."

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

NF2W585AR-P8 is a dual function LED that provides both white light and high doses of energy geared for inactivation of various prevalent bacteria. With a 405nm wavelength1 die known to be effective in sterilization, this LED can be used t... READ MORE

  The 5050 LED is replacing the 3535 LED, which has long been the leader in the outdoor lighting market. The existing ceramic-based 3535 has excellent reliability but is expensive. At present, the 5050 LED, which has achieved remarkable p... READ MORE