LayTec and German University Collaborate on In-situ Photo-Luminescence of Growing III-Nitride LED Structures

In a collaboration between LayTec and Prof. Dirk Rueter´s group at University of Applied Sciences Ruhr West a breakthrough has been achieved regarding the real-time monitoring of InGaN/GaN quantum well emission wavelength during MOCVD growth. It is well known that room temperature wafer based photoluminescence (PL) measurements provide an excellent forecast of the emission wavelength and emission intensity of the later LED devices. Recently, a prototype in-situ PL system worked simulatnneously with a LayTec Pyro 400 in a commercial multi-wafer MOCVD reactor. The related paper [2] was rocketed immediately to the status of  “most downloaded Journal of Crystal Growth articles”  from Science Direct. This  work is supported under grant KF3242801NT3 by BMWi (German Federal Government).

In-situ PL spectra at 690 °C of an InGaN MQW structure. The spectra of the complete QWs were taken after growth of the subsequent GaN barrier layer.(Photo Courtesy of LayTec)
   

[2] C. Prall et al. in Journal of Crystal Growth 415 (2015), 1–6. The full paper can be viewed here.

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Highlights: Brightek unveils the EVO iCLed platform for automotive ambient lighting, addressing the latest trends in personalized interior design. With 7000 mcd of brightness, EVO is ideal for smart surface integration or exterior ambient ligh... READ MORE

The OSCONIQ® P 3737 high-power LED achieves industry-leading wall plug efficiency of 83.2 % in Hyper Red, enabling unique output levels and cost savings Vegetable, flower, and other growers benefit from a stable photon flux thanks to the Q... READ MORE