eLux Granted Patent Covering Micro LED Fluidic Assembly

eLux announced that the U.S. Patent Office has issued in early December US Patent No. 9,825,202 titled “Display with Surface Mount Emissive Elements”. This is the first issued eLux patent which covers the foundational work done on massively parallel fluidic assembly of µLEDs to make high resolution displays. The µLED display technology covered by this patent and 11 other filings currently in progress has the potential to revolutionize the display industry. The inorganic µLED display will have a wider color gamut, higher efficiency and better reliability compared with competing OLED technology.

(Image: eLux)

“We believe that the fluidic assembly methods developed at SLA and eLux will enable low cost µLED displays for video walls and ultimately television,” explained Paul Schuele, eLux’s CTO and an inventor of the technology. He went on to describe how the µLED display uses two nature low-cost technologies; namely the TFT backplanes developed for LCD displays and high brightness GaN LEDs developed for general lighting to fabricate components of the display.

Unfortunately, the pick and place and stamping techniques proposed to position µLEDs on the display backplane are both time consuming and subject to significant yield issues. eLux directly addresses these limitations using simple highly scalable fluidic assembly techniques to achieve massively parallel assembly of µLEDs at fill rates over 50 million devices per hour.

As part of the initial round of funding the company has acquired the fluidic assembly patent portfolio of Sharp corporation, which consists of 20 patent families. Patents acquired from Sharp which are most closely related to the technology covered by US 9,825,202 are:

  • US 9,722,145 covering a direct emitting display with vertical µLEDs manufactured by fluidic assembly methods.

  • US 9,755,110, which covers the well structures used to precisely position the assembled µLEDs in an array.

  • 15/190,813 (allowed) is the foundational patent for the structures that can be used to orient µLEDs (or other components) with one polarity.

  • 15/266,796 (allowed) covers the use of through-hole vias to enhance the yield and selectivity of fluidic assembly.

  • 15/197,266 (allowed) is a color conversion structure using quantum dots to generate red and green colors from blue µLEDs.

Read also:

All You Need to Know About Micro LED in 1H17

Understanding eLux’s Micro LED Patented Technologies

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Introducing a performance of 100 mW, LG Innotek, industrial partner of LASER COMPONENTS, sets new standards for single-chip UVC LEDs. The manufacturer states that this development is two years ahead of current industry forecasts. So ... READ MORE

LG Innotek today announced that it had succeeded in developing an 'advanced flip chip LED package' that demonstrates high efficiency and high luminous flux without deteriorating performance even after it gets through 300℃ sol... READ MORE