Singaporean Researchers Make Silicon-based Micro-Lasers

Combining silicon with a light-producing semiconductor may help develop micrometer-scale lasers, shows Doris Keh-Ting Ng and her colleagues from the A*STAR Data Storage Institute1.

Silicon has revolutionized the manufacture of electrical devices. This abundant semiconductor is easily processed into tiny components, such as transistors, using methods that are scalable to industrial levels, thus enabling the production of hundreds of thousands of elements on a single chip. Electronic engineers would like to further expand the functionality of these integrated circuits by enabling them to create, manipulate and detect light.

These optoelectronic devices could speed up processing of digital information, and lead to micrometer-scale lasers, for use in barcode scanners for example. The problem, however, is that silicon is not an efficient light generator.

A microlaser comprised of a cylinder of indium gallium arsenide phosphide (red) on silicon (blue) could enable integrated optical circuits.(Photo courtesy of A*STAR Data Storage Institute)

Ng’s team designed and produced a laser compatible with silicon fabrication techniques by combining silicon and another semiconductor material that can produce light: indium gallium arsenide phosphide (InGaAsP). “Our results demonstrate a promising approach for efficient and compact active optoelectronic devices on silicon using a very thin III-V semiconductor layer,” says Ng.

A crucial consideration in any laser structure is optical feedback: the ability to trap light within the structure to drive further light generation. In conventional lasers, this is done by placing a mirror on either side of the light-generating region. Instead, Ng and the team used a cylindrical device geometry. This trapped some of the generated light at the walls of the device and forced it to propagate round inside the cylinder. This is called a whispering gallery mode because the same effect traps sound waves in a circular room such as a cathedral dome.

The team started with a silicon substrate, on to which they deposited a thin layer of silicon oxide. The optically active InGaAsP film, just 210 nanometers thick, was fabricated separately and then bonded on top of the silicon oxide. The team then etched through some of the material to create cylinders either two or three micrometers in diameter. The three-micrometer devices emitted laser light with a wavelength of 1,519 nanometers, very close to that used in commercial optical communications systems.

From the left: Doris Ng, Lee Chee Wei, and Wang Qian. Absent: Tan Ai Ling.(Photo courtesy of A*STAR Data Storage Institute)

A unique feature of this device is that the whispering gallery mode extends over both the silicon and the InGaAsP regions. The InGaAsP provides light amplification while the silicon passively guides the light. “Next we hope to apply these ideas to devices operating at room temperature,” says Ng. “Operation at higher temperature will require fine-tuning of the laser design and fabrication.”

The A*STAR-affiliated researchers contributing to this research are from the Data Storage Institute and the Institute of Materials Research and Engineering

Reference

Lee, C.-W., Ng, D. K.-T., Tan, A. L. & Wang, Q. Hetero-core III-V/Si microlaser. Optics Letters 41, 3149–3152 (2016). | Article

Related Links

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

The recent outbreak of COVID-19 has prompted the large-scale search for practical solutions that can prevent the spread of the deadly virus — from researchers and scientists committed to finding a solution, to the manufacturers and consu... READ MORE

Nichia’s Tunable 757 receives rave reviews from industry leaders, including the coveted LpS Best Sustainability Technology Award. Nichia, the leader in and inventor of the high-brightness LED, announced its game-changing single LES, tuna... READ MORE