TDK Showed Two Passive Matrix OLED Panels at Ceatec Japan 2010

TDK Corp showed flexible and see-through passive matrix OLED panels at Ceatec Japan 2010 from Oct 5 to 9, 2010.
 
According to TDK, the flexible OLED panel is as thin as 0.3mm or less. The weights of the color-display and monochrome-display models are 1.11g and 0.96g, respectively.


 
Besides, the display is not affected even if the panel is bent to a curvature radius of up to 25mm. The flexible type is targeted at mobile devices including mobile phones.
 
The flexible panel has a screen size of 3.5 inches and a pixel count of 256 x 64.
 
The flexible OLED panel was prototyped at Kita Ibaraki Plant, which has production lines for OLED panels using a glass substrate. TDK plans to start volume production of the panel at the end of 2011.
 
On the other hand, the transmittance of the see-through OLED panel is 50% or higher.


 
It has a screen size of 2 inches and a pixel count of 320 x 240 (QVGA). Its resolution was enhanced by employing a driver chip developed by Dialog Semiconductor Plc of Germany. And it has a top-emission structure.
 
TDK pointed out that they would mass-produce the panel as soon as device makers asked.

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

(June 13) Macroblock participated in the annual event InfoComm 2025 held at the Orange County Convention Center in Florida, USA from June 11 to 13, 2025. Macroblock invited customers to visit the booth with the theme of "Meet with Macrobl... READ MORE

Whether in industrial manufacturing, medical technology or the automotive sector – lasers enable precise distance measurements, high-accuracy material processing, and also open up new possibilities in medical applications. From June 24 t... READ MORE