Checkers Introduces New Class l LED Beacons with Patent-Pending Cooling System

Checkers Industrial Safety Products announced the immediate availability of their new AID LIGHTS™ LED2250 Class I Beacons. With an ultra efficient power supply, these high intensity beacons produce more flashes per minute with less power draw, which minimizes maintenance and replacement costs. AID LIGHTS™ LED2250 Beacons quickly alert people of upcoming hazards to create a safer work environment for traffic safety, construction, mining, utilities, or in other hazardous or emergency areas.

 AID LIGHTS™ LED2250 Class I Beacons

“Our patent-pending cooling system includes an integrated heat sink, which allows AID LIGHTS™ LED2250 Beacons to be driven at higher intensities without sacrificing performance,” said Jesica Bailey, Director of Marketing for Checkers Industrial Safety Products. “Air continually flows through the inner heat sink and pulls heat away from the LED lights. This enables brighter modes of operation, including the slower rotational modes that produce large amounts of heat.” Allowing Checkers to meet the significant Title 13 requirements of California and other states.

Independent lab-certified to meet SAE J845 Class I requirements, AID LIGHTS™ LED2250 Beacons are the only 15 watt high-powered LED beacon on the market that can be used as a steady burn, non-flashing beacon.

Constructed with heavy duty materials and a water-resistant compartment for all electronics, these durable lights are built with to withstand the harsh weather and working conditions frequently experienced in construction, mining, and other industrial applications.
Additional features of AID LIGHTS™ LED2250 Beacons are a circuit board protected against reverse polarity, 10 changeable flash patterns (additional flash patterns can easily be programmed), an intelligent automatic dimming control, and a dual power plug switch that allows users to easily switch flash patterns without leaving the driver’s seat. These beacons are available in five different colors, each of which includes 30 high intensity LEDs. An optional remote control to change flash patterns is also available.

For mounting, AID LIGHTS™ LED2250 Beacons come standard with a 1” NPT pipe mount and a 3-hole flange with three 12 inch wire pigtails. A magnet base is also available, which is a combination 1” NPT pipe mount, 3-hole flange, and 100 lb. pull magnet mount with a 15 ft straight cord and 2-way switch power plug. The magnet mount has eight Neodymium anti-scratch magnets that are positioned wider on the base for superior holding power while eliminating vehicle scratches and scuffs.

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Osram Opto Semiconductors is expanding its Oslon Black family for the infrared range with six new automotive IREDs. The 850 nm versions are intended for exterior applications such as night vision, pedestrian protection, pre-field recognition a... READ MORE

Lumileds introduced the LUXEON CZ Color Line, a product line optimized to deliver maximum punch. “The LUXEON CZ features up to 48% higher punch than any other undomed color LED,” said Jennifer Holland, Product Line Direct... READ MORE