2011-07-20

Future Lighting Solutions Cooperates with enLighten Australia for Multi-purpose Lighting

Future Lighting Solutions has collaborated with enLighten Australia, in designing and implementing a low energy replacement for multi-purpose lighting in commercial environments. The project required an analysis of how the market currently uses multi-purpose lighting for areas such as fire stairs and back rooms, which wastes a lot of light and therefore a lot of energy. The first step was to investigate the way such spaces are used and how they are lit, in order to identify key issues and to determine the most effective, efficient solutions. Future Lighting Solutions worke...
Continue reading
2011-07-20

Luminus Devices CBM-380 Big Chip LED Supports for Philips Vari-Lite VLX Wash Luminaires

According to Luminus Devices, its CBM-380 color mix Big Chip LEDTM  powered Philips Vari-Lite VLX Wash luminaires , are at the heart of the replacement lighting rig recently installed at the iconic Grand Ole Opry House in Nashville. The new rig not only need to replace the flood damaged rig, it also had to be flexible enough to light a wide variety of stage performances and TV broadcasts yet mobile enough to make the Opry’s seasonal move for their Winter Series performances. Luminus’ CBM-380 chip that is the solid-state light engine o...
Continue reading
2011-07-20

Energy Focus Received $1 Million Grant to Develop Low Cost IntelliTube(TM) Light Sensor

Energy Focus has received a $1 million grant from the Ohio Third Frontier Sensors Program to develop an ultra-low cost light sensor to complement IntelliTube(TM), Energy Focus' LED based fluorescent replacement technology.   Roger Buelow, Energy Focus CTO thought it was exciting to be selected for the Ohio Third Frontier Sensor grant. He thought the funding would accelerate the development of CRICKET ('Cost-effective Real-time Intelligent Collective Knowledge Environmental Transmitter'), the world's first ultra low-cost wireles...
Continue reading
2011-07-20

New Standard and Custom QUASARBRITE™ UV LEDs from LUMEX Combine 10x Longer Lifespan and up to 50% Cost Savings

New UV LEDs also lower energy consumption by 70% while providing superior light performance Lumex announces the global expansion of the QuasarBrite™ UV family of LED technologies to include three new standard wavelengths and also announces the availability of custom UV LED arrays.  QuasarBrite UV LEDs provide up to 10 times longer lifespan, up to 50% cost savings , up to 70% energy consumption savings,  and superior light performance compared to alternative technologies. The RoHs compliant QuasarBrite UV LEDs are now available in stan...
Continue reading
2011-07-20

$10 Million and GE Collaboration Light Way for Growth of Nuventix, Maker of LED Cooling Technology

Nuventix, creator of an LED cooling technology for energy-efficient lighting, announced that GE (NYSE: GE) has provided capital alongsideother investors and recently entered into a license agreement to access Nuventix’s extensive patent portfolio.   GE unit GE Energy Financial Services and The Bergquist Company joined existing investors Braemar Energy Ventures, CenterPoint Ventures, InterWest Partners and Rho Ventures to complete a $10 million investment round to fund Nuventix’s global expansion and technology advancements.  GE&rsq...
Continue reading
2011-07-19

austriamicrosystems Introduces Two LED driver ICs for LCD TV Application

austriamicrosystems has designed two new LED driver ICs for the latest LCD TVs. The new AS382x LED controller ICs are available as the 16-channel AS3820 and the 12-channel AS3821 to meet the needs of the most common architectures of both direct and edge-lit LED TVs. Both ICs feature ±0.2% channel-to-channel accuracy -- the highest accuracy available -- to guarantee the best possible light uniformity and picture quality. The ICs can be used for driving external power MOSFETs or, due to their unique base current error compensation, even driv...
Continue reading
2011-07-19

Philips’s Two LED DayLight Solutions

Philips has launched two new Daytime Running Light (DRL) – LED DayLight 4 and 8 for drivers. According to the company, Philips DayLight modules automatically switch on when the engine starts, increasing the visibility of the car to other road users and pedestrians. They also have a low energy consumption compared to existing halogen headlamps.  LED DayLight 4 ensures high visibility for safer daytime driving, while the LED DayLight 8 offers motorists maximum visibility and premium design. Both are equipped with Philips LUXEON LEDs and...
Continue reading
2011-07-18

OSRAM Opto Semiconductors Adds to its TOPLED Black Series Portfolio

OSRAM Opto Semiconductors has added three colors to its TOPLED Black Series 60° beam angle portfolio and now offers all five colors with a 30° beam angle. “This means that we have the broadest portfolio of ‘black’ LEDs on the market and can cover a wide range of applications”, said Product Manager Sven Weber. The LEDs are particularly suitable for monochromatic and multicolor displays, such as those in electronic  road signs, travel information displays, parking control systems and price information pillars at gas stations. T...
Continue reading
2011-07-18

LG Innotek Creats World’s Single Largest LED Production Complex

LG Innotek announced that the installation and operation for one-year of LED lights for all lighting sources at its Paju LED Plant translates into the effect of planting 63,000 pine trees,which is equivalent to the amount of trees it would take to cover an area the size of Yeouido Park in Seoul. LG Innotek’s Paju LED Plant has installed more than 10,000 LEDs, including those at production lines, welfare facilities and streets, and initiated the plant’s operation as an eco-friendly site in July of last year. The Paju LED Plant comprises LED...
Continue reading
2011-07-18

City of Tempe Selects US Lighting Tech’s LED for Energy Saving

The City of Tempe, Arizona,has selected US Lighting Tech (USLT) to supply efficient street lights for the energy-efficient street lighting program of the municipality. USLT will supply the municipality 1,000 units of its Cobra 100 Series Induction Streetlight and the installation of the lights is anticipated to commence this month. The company’s 70 W Cobra 100 Series induction streetlights will replace the present obsolete type of 125 W high pressure sodium and metal halide systems. The induction lights are designed to save around 60% of energy and 80...
Continue reading
2011-07-18

LED Video Jacket for Bicycle Lighting

There is a 60” LED video display installed over a jacket’s body  and sleeves,which is desigend for wearable and interactive bicycle lighting. LED jackets can provide a high-tech alternative to the luminous yellow tabards favoured by soem cyclists.   The jacket gives off more than enough light for the urban cyclist. In addition,the moving images could display messages to other road users.Large flashing arrows be highly-visible turn signal and messages such as ‘too close’ , ‘thank you’ and ‘stopping’ would prove useful...
Continue reading
2011-07-18

Obelux Launches World’s First High Intensity LED

The Finnish-based Obelux Ltd has designed the world’s first high intensity LED,delivering outstanding 600 000 candelas, to replace old Xenon technology on over 150 meter tall buildings and masts. Kuokkala water tower in Jyväskylä The new, groundbreaking high intensity LED light has the effective power of 200 000 candelas and it delivers total of 120 000 lumens,as well as provides over 10 years of reliable life....
Continue reading
2011-07-15

Toshiba Breaks the Green Gap in LEDs

Toshiba's Tamonari Shioda has presented the company’s new discovery about the green gap in LEDs at the ninth International Conference on Nitride Semiconductors (ICNS). Currently, the green gap in LEDs is that the rapidly declining efficiency of green light emitters at longer and longer wavelengths. According to Toshiba's Tamonari Shioda, by inserting thin AlGaN layers in the active region of a conventional device, this approach could increase the output power of green LEDs by a factor of almost ten.  ...
Continue reading
2011-07-15

Samsung Sets up New Record on Nitride LEDs on 200 mm Silicon

Reportedly, Samsung Advanced Institute of Science and Technology (SAIT)  has set up a new record of manufacturing nitride LEDs on 200 mm silicon. Instead of sapphire,with this platform, the widely used substrate for making LEDs promises to cut the cost of LED deposition and processing. Growth of high-quality GaN layers on silicon is not easy,because of  differences in both the lattice constant and the thermal coefficient of expansion of the two materials. SAIT has addressed both these issues by creating a crack-free template featuring AlN/Al...
Continue reading
2011-07-15

NexSense LED Troffer Series Receives UL Compliance Approval

NexPhase Lighting, Inc.,the subsidiary from Onteco Corporation, is announced to clarify the significance of the UL compliance approval it received for it's 2x2 NexSense LED Troffer Series No. TRO75RWD from Intertek.   Jon Cooper, CEO of NexPhase, thought highly of the significance of the UL compliance approval. He believed that UL compliance approval was an essential safety requirement for LED Luminaries and without it they were unable to reputably sell LED lighting fixtures to customers. It was also an essential requirement to use the nu...
Continue reading
2011-07-15

Translucent’s New GaN-on-Si Wafer Template with Embedded DBR Mirrors

Translucent, Inc., has designed a proprietary GaN-on-Si wafer template with embedded DBR mirrors for low-cost LED growth application. With its new embedded silicon solution (Mirrored Si™), LEDs can now be grown directly on top of the GaN-on-Si template that includes an embedded DBR mirror, directly lattice matched to the silicon substrate. On top of this DBR mirror is a layer of proprietary patented Rare Earth Oxide (REO), which allows GaN to cap the template and does not require subsequent removal of the substrate. At present, the company i...
Continue reading
2011-07-15

Novaled Develops White OLED of 60 lumens/watt

Novaled recently makes a breakthrought on white OLED with light output of 60 lm/W at a brightness of 1,000 cd/m2. According to the company,  these LED have 100,000 hours lifetime at an initial brightness of 1,000 cd/m2 while using commercially available fluorescent blue emitting material. The color rendering index  is also tested high of 87 for these LEDs. A very broad light emission spectrum and good CIE color coordinates (0.470/0.429) were achieved, which is close to illuminant A and inside the US Department of Energy  quadrangles meeting the DO...
Continue reading
2011-07-15

Philips Eyes to LED-illuminated Wallpapers

According to Philips, there may be a promising future for ambient lighting in glowing walls, therefore the company has scheduled to wallpapers containing integrated LEDs. The luminous sound-absorbing textiles would glow in variety of colors to cater to he user's requirements. Philips is collaborating with customizable acoustic panels Denmark-based anufacturer Kvadrat Soft Cells to evelop the luminous wallpaper panels. Soft Cells acoustic panels are flexible and can be tailored to fit a wide variety of interiors. The Philips' LED illuminated texture wallpape...
Continue reading
2011-07-15

Taiwan-based FZLED Sees Serious Growth Case Studies Find That LED Brand Is Being Embraced Worldwide

FZLED, maker of high-performance LED lighting products, is excited to announce extremely high customer-satisfaction levels and exceptional growth. FZLED has been expanding quickly with consumers embracing their numerous lines of high-quality LED bulbs that offer dust-free lighting and several innovative options, like their easy-to-operate on/off switch-dimming feature. To date, FZLED boasts customers in many countries including the UK, Canada, France, South Africa, the UAE, and the United States. Because of the popularity of FZLED’s products, the ...
Continue reading
2011-07-14

Heraeus Design Optimization for SCB Substrates, LEDs, Fraunhofer

More light in the long run •    Junction temperature and thermal management of High Brightness LEDs (HMLEDs) optimized •    Fraunhofer Institute completes tests on substrates In close collaboration with the Fraunhofer Institute for Reliability and Microintegration (IZM) Heraeus has continued to work on the design optimization of its SCB substrates for LEDs. Quite apart from the results already gained in the field of short duration LED applications, the focus this time was put on applications of a longer duration. ...
Continue reading
2011-07-14

Osram Makes Progress on Green Laser Performance

Recently, Uwe Strauss from Osram Opto Semiconductors has demonstrated  the company’s improved green laser performance that are fabricated on the conventional plane of GaN,at the ninth International Conference on Nitride Semiconductors. According to Strauss , these lasers will target pico-projectors, where they can combine with red and blue equivalents to provide a lighting source with a small footprint that is free from a focusing element. Strauss introduce that the green source in a pico-projector producing a 100 lumen brightness must meet the requirements as...
Continue reading
2011-07-14

Dialight’s L-864 LED Red Beacon for Hazardous Locations Application

Dialight has designed its fourth-generation LED-based L-864 Red Medium Intensity Beacon certified for Class I, Division 2 hazardous locations use. In contrast to traditional Xenon and incandescent units for lighting chimney stacks, cooling towers or wind turbines in hazardous locations, the Class I, Div 2 L-864 Red Beacon at just under 9 inches high and weighing only 20 pounds, offers significantly less wind load and is highly resistant to shock and vibration. Operating at just 20 watts, the L-864 is more than 90 percent more efficient than incandescent technology...
Continue reading
2011-07-14

Elemental LED Adds New Aluminum Channels for LED Strip Light

Elemental LED has added aluminum channels aimed at satisfying demand for stylish LED strip light installation options. The aluminum channels can be available in cabinet installations, display cases and for architectural accent lighting. Alternatively, channels can be used in conjunction with LED strip light in nearly any situation requiring more durability or the style of a sturdy fixture. According to the company,pairing an aluminum channel with the appropriate strip light choice enables customers to build the perfect fixture for almost any project. The Aluminum Cha...
Continue reading
2011-07-14

ESI Releases New LED Wafer Scribing System

ESI, Inc.has released its most advanced LED wafer scribing system, the AccuScribe 2600 and shows it at the SEMICON(R) West exhibition in San Francisco. with patented, industry-leading technology, ESI's AccuScribe 2600 targets to cater to customer requirements for LED  manufacturing, including Patterned Sapphire Substrate (PSS), Distributed Bragg Reflector (DBR), Metal Mirror (MM) and other advanced light extraction technologies....
Continue reading
2011-07-13

Fairchild Semiconductor Offers Designers a Total Solution Portfolio for Low-, Mid- and High-Power LED Lighting Applications

Broad Portfolio Simplifies Supply Chain Complexity; Value-Added Solutions Achieve High-Efficiency System Performance With the increasing popularity of LED lighting applications, designers face challenges ranging from design complexity and the need for high system efficiency to limited PCB space and the management of multiple vendors to meet all of their design requirements. To address these challenges, Fairchild Semiconductor (NYSE: FCS), a leading global supplier of high performance power and mobile products, offers a broad portfolio of LED lighting ...
Continue reading
2011-07-13

LumiGrow Receives Funding to Develop LED Horticultural Lighting Technology

LumiGrow, Inc.,the provider of LED lighting solutions for horticulture, has received an undisclosed sum in Series A financing from Clean Pacific Ventures, to accelerate the market expansion of energy-efficient LumiGrow® lighting solutions for commercial agriculture and horticultural research. Clean Pacific Ventures' General Partner and Chief Investment Officer Sean Schickedanz will join LumiGrow's Board of Directors. Generally, greenhouse growers supplement sunlight with high-intensity discharge  lighting to boost crop growth and extend grow...
Continue reading
2011-07-12

ETC Selador Lights Paul Cocksedge Studio Exhibition in Milan

Creating a celebration of light, lighting designer Paul Cocksedge used 80 ETC Selador® Classic Ice™ LED fixtures in an exhibition space as part of the Salone del Mobile home furnishing exhibition in Milan, Italy. The project involved projecting light from the blue part of the color spectrum from concealed Selador fixtures onto an 82-foot-long, curved white wall extension of a lighting showroom in the heart of Milan’s design district. When visitors viewed the wall through a red light shade, a previously hidden video of a car appeared to the viewer. C...
Continue reading
2011-07-12

Illumitex LEDs Designed for Horticulture Lighting Market

Illumitex recently has developed Surexi LEDs to accelerate plant growth while promoting maximum plant size and vitality. According to Illumitex ,the Surexi is the only LED on the market that includes a custom light spectra in a single LED package, eliminating the colour separation issues inherent in other horticulture LED lighting. Utilising Illumitex’s patented square light pattern and precision beam control, Surexi LEDs produce unrivalled edge-to-edge light uniformity while ensuring all plants receive the same amount of light – leading to more unifo...
Continue reading
2011-07-12

USHIO to Showcase Two New UX4-LEDs Series Models at SEMICON West 2011

USHIO INC. has kicked off shipping the world's first 200-mm wafer full-field projection lithography tool "UX4-LEDs FFPL 200" for manufacturing High-Brightness LED chips. Additionally, the company has completed development of the laser lift-off system "UX4-LEDs LLO 150" for volume manufacturing of vertical-structure LED chips. These latest models of the UX4-LEDs are based on the same platform as USHIO's field-proven UX series, which has an installed base of more than 1,100 systems. They will be exhibited thro...
Continue reading
2011-07-12

Kyocera Launches LED-UV Curing System for Printing Machines

Newly, Kyocera Corporation has developed the KVL-G3 Series LED-UV curing system, a key component in industrial printing machines. Combined with LED techology, the new product achieves a 70% reduction in power consumption compared to existing lamp-system products (metal halide). In addition, thanks to Kyocera's proprietary high-density packaging technologies, the company has succeeded in arranging LED chips on a high-density surface as opposed to in-line conventional products. With this development, Kyocera has enabled the fastest label printing capability...
Continue reading
New XLamp® S Line LEDs enhance growth, last longer, lower energy costs Horticulture and other forms of agricultural lighting require application-tuned ratios of spectral content, high efficacy and long lifetimes. Whether you are interest... READ MORE
Cree LED delivers superior brightness, light quality and efficiency for portable applications. Our XLamp® LEDs are ideally suited for torch, flashlight, tactical flashlight, head lamp, bike light, weapon light and lantern portable applicat... READ MORE