Avago Technologies, a leading supplier of analog interface components for communications, industrial and consumer applications, today announced one of the industry’s smallest, most energy efficient 3-Watt (3W) high power LEDs with high color rendering index (CRI) for use in a wide range of solid-state lighting applications. With dimensions of 5 mm by 4 mm by 1.85 mm thick, Avago’s compact 3W ASMT-Jx33 is packaged in a 6-leaded small outline package (SOP) and capable of being driven to up to 700 mA to provide high flux output performance.

Ingo Maurer, internationally renowned designer and producer of exceptional lamps and lighting systems, will exhibit two OLED lamps which are the result of joint efforts with Novaled on the Light + Building trade show in Frankfurt. Novaled AG, a pioneer in OLED Lighting- and Display-Technology, has developed some transparent, highly efficient OLED modules for this purpose.

Texas Instruments Incorporated (TI), today introduced a complete LED lighting driver reference board in collaboration with Lemnis Lighting to help address three important issues: cost, dimming and efficacy. The TPS92010 LED-lamp Reference Board applies TI’s semiconductor technology for general LED lighting and Lemnis Lighting’s expertise in dimmable lighting applications. The board can help speed adoption of energy-saving retrofit LED light bulbs.

Tess, a LED lighting developer and manufacturer in Taiwan, today announces its 10W/1,000lm LED bulb designed with CREE inside. The latest Tess 10W/1,000lm LED bulb delivers luminous efficiency of 100lm/W which is the most updated standard of the world and can replace 100W incandescent bulb with life time up to 10,000 hours.

With T8 Substitube OSRAM provides a long-lasting LED alternative to T8 fluorescent lamps Saving energy could hardly be easier – existing lighting installations with regular T8 36W fluorescent lamps and conventional control gear can now be switched to economical LED technology with OSRAM’s high-performance T8 Substitube. T8 fluorescent lamps with conventional control gear are still used in many areas but OSRAM is the first major lighting manufacturer to develop a solution to replace them with energy-efficient and long-lasting LED lamps with one simple twist.

Bruck Lighting Systems, Inc. announces the launch of the new Ledra® Chroma and Chroma II. This is a fully adjustable, high-output 10W LED spot fixture with industry-best fixture-to-fixture color consistency of unprecedented +/- 50 Kelvin. This is achieved through the use of a single-source LED module with patented cold remote phosphor technology developed by Xicato, Inc.

What happens if you cross a powerful high-performance LED with a robust torch design? The answer: Crosser - the practical range of torches for outdoor adventurers. Seven models in different shapes and sizes are the perfect companions for excursions which could last a while. The torches have an impressively robust plastic casing and OSRAM Golden Dragon Plus LEDs, which are very bright and reliable.

Primestar LED officially announces that it will offer their custom Bright Line™ analysis to their customers. The Bright Line™ analysis includes an in depth return on investment report, including 5 important components which allows their customers to make an informed decision regarding their LED retrofit.

Japan's Fujifilm Corp. plans to enter the market for LED lighting materials with a new kind of light diffusing film which is thinner and offers higher illumination intensity than products now available. The light diffusing film acts to spread out the light from the LED bulbs so they are not so bright. These diffusers are now typically made from acrylic resin materials which are milky in color and around 2mm thick. The thickness means they are hard to bend, and the milky color means that some of the light is wasted.

SynJet Continues to Move LED Market Forward by Lowering Power Consumption While Improving Performance Nuventix, Inc., innovator of SynJet® active thermal management solutions, will reveal next week to attendees at Light+Building 2010 the next generation of its groundbreaking active cooling technology.

New LED Cooler for Spot Lights Packs Powerful Punch in Small Package From Light+Building, Nuventix, Inc., innovator of SynJet® active thermal management solutions, today announced the general availability in EMEA of the SynJet Spot Light Cooler. Nuventix’ SynJets are the smallest, most reliable, and adaptable thermal management solutions in the solid state lighting industry, and LED spot lights are one of the most demanding applications.

Easy-to-Use, Non-Contact, 3D Optical Surface Profilers Deliver up to 10x Throughput Improvements

GE Lighting Solutions leads an LED charge with its expansion in the roadway lighting segment: the new Evolve(TM) LED R150 Cobrahead luminaire features an advanced LED optical system that provides improved horizontal and vertical uniformity, reduced glare and improved lighting control.

New Product: LED-3000 Ring Light for use with Binocular and Trinocular microscope systems. Product Description: Luxo’s new LED-3000 Ring Light combines energy-efficient LEDs, exceptional lumen maintenance, built-in dimming controls and a removable/replaceable diffuser cover, all at an incomparable value.

The PhlatLight UV CBT-120 Offers Powerful and Longer Life Cycle UV LED Luminus Devices, Inc., developer and manufacturer of big-chip PhlatLight® LEDs, today announced the UV CBT-120, the company’s first big-chip UV LED built on PhlatLight technology.  The CBT-120 is ideally suited for a widely diverse number of industrial processes ranging from epoxy, ink, paint, laminate and adhesive curing to semiconductor processing.

New Archilede, iGuzzini by ENEL Sole, street luminaire shine with OSRAM Opto Semiconductors’ Golden Dragon Plus LEDs with a color temperature of 6,000K.  The color rendering of the LEDs provides a natural color impression which can enhance safety and security. Due to their directional nature, LEDs eliminate stray light and reduce overall light pollution. In additional to their high efficiency this LED also provides long life (between 60,000 and 100,000 hours depending on operating conditions) which translates to lower maintenance costs.

Intematix Corp. today announced the introduction of the DL6 solid state retrofit downlight, designed for installation in standard 6-inch recessed can fixtures. The announcement is accompanied by the news that the new DL6 has been awarded Energy Star® certification, and is in compliance with California's Title 24 energy efficiency code. Producing more than 600 nominal total lumens the DL6 delivers a 3000K warm white output and color rendering index (CRI) greater than 80.

Cypress Semiconductor Corp. today introduced new AC-DC digital power controllers for LED lighting. The CY8CLEDAC01/02 controllers offer a cost-effective solution for both non-dimmable and dimmable LED lighting, delivering high efficiency while meeting EnergyStar requirements. They provide automatic dimmer detection, so they work with the majority of the existing installed base of wall dimmers, providing dimming down to 2% with no flicker.

DOMINANT introduces new high intensity InGan devices, DWx-LJG of its Power DomiLED series, alternative to the existing DWx-YJG device and completing their product portfolio of medium power LEDs. With an operating current of only 30mA, this LED features a luminous intensity of 1800mcd (typical) for true green and 560mcd (typical) for blue.

Luminus Devices, developer and manufacturer of big-chip PhlatLight® LEDs, today announced that it provides the light source inside Martin Professional’s new MAC 350 Entour™, the world’s first high output LED-based, mercury-free, profile light. The MAC 350 Entour comes equipped with seven CBT-90 white PhlatLight LEDs and has a total light output of 6,500 lumens, light levels previously achieved only with high energy discharge lamps. The MAC 350 Entour has a lifespan of more than 25,000 hours. 

DELO has recently developed the DELOLUX 20 area lamp which irradiates adhesive layers evenly, for smooth curing of laminar bonding areas in just seconds. This newly developed LED area lamp perfectly complements DELO’s lamp family, which was introduced in 2009. LEDs have major advantages over classic discharge lamps, including long lifetime and stable light intensity.

Kreios G, the new LED luminaire by OSRAM, offers spectacular effects and texts of light. It is the first LED module suitable for use in gobo projectors. Kreios G replaces the traditionally used 50W halogen luminaires and impresses with its high light output, long durability and small dimensions. Kreios G, the new LED luminaire by OSRAM, offers spectacular effects and texts of lights.

LEDs measured on the test bench can produce different photometric and color results in actual operation mounted on the PC board. Also measuring slight color and flux differences between discrete LEDs mounted in a module is not possible with typical LED measurement set-ups.

Lumex announces the global launch of its QuasarBrite High-Temperature Seven-Segment numeric LED Display technology capable of providing bright, crisp display performance in market-leading temperature ranges up to 105°C. The new high-temp seven-segment ¼ watt LED displays are available in sizes from 0.28 inch to 4 inch character height and come with complementary integration support from Lumex´s team of Technical Design Specialists.

Dialight introduces its new ultra-bright DuroSite LED High Bay Fixtures. The Dialight DuroSite High Bay fixture, incorporates Cree’s Xlamp® XP-G LEDs, delivering nearly 12,000 lumens while consuming only 150 watts, providing unparalleled levels of quality overhead light, and significantly reducing energy consumption and cost.

Primestar LED further expands its commercial indoor product line with newly designed LED T8 and LED T5 tubes. With excellent thermal management and color rendering, this product is a smart replacement of traditional fluorescent tubes.

Epistar announces today the successful development of a new AlGaInP LED with record-breaking efficacy of 133 lm/W. Applying the company's novel light-extracting technology, Epistar’s newest additions to its PX series of chips continue to push the envelope on energy efficiency and lighting quality. At a dominant wavelength of 613 nm, the small chip in the PX series reaches 133 lm/W driven by 20mA, while the power chip in the same series reaches 110 lm/W at 350mA.

Cree, Inc., announces the commercial availability of the award-winning XLamp(R) XP-G LED in warm- and neutral-white color temperatures (2600 K to 5000 K CCT). These new XP-G LEDs extend Cree's highest level of light output and efficacy across the white color spectrum, driving general lighting applications such as LED replacement lamps, outdoor area and commercial luminaires.

LEDKE Technology Co., Ltd recently introduce soft flexible led light strip. This strip is used soft PCB board as a substrate, high-brightness SMD LEDs as light source, the LEDs evenly distributed on the surface of strip PCB board, light-emitting angle of 120 - 180 degrees, and with very slim design. Every three LEDs compose a loop, you can cut off the strip between each 3 LEDs along the cutting line marked on the PCB, on the back there is 3M adhesive for pasting, can be arbitrarily fixed on the uneven surface.

Cypress Semiconductor Corp. today announced that its PowerPSoC(r) embedded power controller is an integral part of the revolutionary new iPAR-38(tm) LED replacement bulb from MSi. The new bulb leverages PowerPSoC's programmability and flexibility to deliver unique features including adjustable power levels, communications capability, and the ability to be dimmed through the use of virtually any installed dimming system.