GE Lighting Solutions leads an LED charge with its expansion in the roadway lighting segment: the new Evolve(TM) LED R150 Cobrahead luminaire features an advanced LED optical system that provides improved horizontal and vertical uniformity, reduced glare and improved lighting control.

New Product: LED-3000 Ring Light for use with Binocular and Trinocular microscope systems. Product Description: Luxo’s new LED-3000 Ring Light combines energy-efficient LEDs, exceptional lumen maintenance, built-in dimming controls and a removable/replaceable diffuser cover, all at an incomparable value.

The PhlatLight UV CBT-120 Offers Powerful and Longer Life Cycle UV LED Luminus Devices, Inc., developer and manufacturer of big-chip PhlatLight® LEDs, today announced the UV CBT-120, the company’s first big-chip UV LED built on PhlatLight technology.  The CBT-120 is ideally suited for a widely diverse number of industrial processes ranging from epoxy, ink, paint, laminate and adhesive curing to semiconductor processing.

New Archilede, iGuzzini by ENEL Sole, street luminaire shine with OSRAM Opto Semiconductors’ Golden Dragon Plus LEDs with a color temperature of 6,000K.  The color rendering of the LEDs provides a natural color impression which can enhance safety and security. Due to their directional nature, LEDs eliminate stray light and reduce overall light pollution. In additional to their high efficiency this LED also provides long life (between 60,000 and 100,000 hours depending on operating conditions) which translates to lower maintenance costs.

Intematix Corp. today announced the introduction of the DL6 solid state retrofit downlight, designed for installation in standard 6-inch recessed can fixtures. The announcement is accompanied by the news that the new DL6 has been awarded Energy Star® certification, and is in compliance with California's Title 24 energy efficiency code. Producing more than 600 nominal total lumens the DL6 delivers a 3000K warm white output and color rendering index (CRI) greater than 80.

Cypress Semiconductor Corp. today introduced new AC-DC digital power controllers for LED lighting. The CY8CLEDAC01/02 controllers offer a cost-effective solution for both non-dimmable and dimmable LED lighting, delivering high efficiency while meeting EnergyStar requirements. They provide automatic dimmer detection, so they work with the majority of the existing installed base of wall dimmers, providing dimming down to 2% with no flicker.

DOMINANT introduces new high intensity InGan devices, DWx-LJG of its Power DomiLED series, alternative to the existing DWx-YJG device and completing their product portfolio of medium power LEDs. With an operating current of only 30mA, this LED features a luminous intensity of 1800mcd (typical) for true green and 560mcd (typical) for blue.

Luminus Devices, developer and manufacturer of big-chip PhlatLight® LEDs, today announced that it provides the light source inside Martin Professional’s new MAC 350 Entour™, the world’s first high output LED-based, mercury-free, profile light. The MAC 350 Entour comes equipped with seven CBT-90 white PhlatLight LEDs and has a total light output of 6,500 lumens, light levels previously achieved only with high energy discharge lamps. The MAC 350 Entour has a lifespan of more than 25,000 hours. 

DELO has recently developed the DELOLUX 20 area lamp which irradiates adhesive layers evenly, for smooth curing of laminar bonding areas in just seconds. This newly developed LED area lamp perfectly complements DELO’s lamp family, which was introduced in 2009. LEDs have major advantages over classic discharge lamps, including long lifetime and stable light intensity.

Kreios G, the new LED luminaire by OSRAM, offers spectacular effects and texts of light. It is the first LED module suitable for use in gobo projectors. Kreios G replaces the traditionally used 50W halogen luminaires and impresses with its high light output, long durability and small dimensions. Kreios G, the new LED luminaire by OSRAM, offers spectacular effects and texts of lights.

LEDs measured on the test bench can produce different photometric and color results in actual operation mounted on the PC board. Also measuring slight color and flux differences between discrete LEDs mounted in a module is not possible with typical LED measurement set-ups.

Lumex announces the global launch of its QuasarBrite High-Temperature Seven-Segment numeric LED Display technology capable of providing bright, crisp display performance in market-leading temperature ranges up to 105°C. The new high-temp seven-segment ¼ watt LED displays are available in sizes from 0.28 inch to 4 inch character height and come with complementary integration support from Lumex´s team of Technical Design Specialists.

Dialight introduces its new ultra-bright DuroSite LED High Bay Fixtures. The Dialight DuroSite High Bay fixture, incorporates Cree’s Xlamp® XP-G LEDs, delivering nearly 12,000 lumens while consuming only 150 watts, providing unparalleled levels of quality overhead light, and significantly reducing energy consumption and cost.

Primestar LED further expands its commercial indoor product line with newly designed LED T8 and LED T5 tubes. With excellent thermal management and color rendering, this product is a smart replacement of traditional fluorescent tubes.

Epistar announces today the successful development of a new AlGaInP LED with record-breaking efficacy of 133 lm/W. Applying the company's novel light-extracting technology, Epistar’s newest additions to its PX series of chips continue to push the envelope on energy efficiency and lighting quality. At a dominant wavelength of 613 nm, the small chip in the PX series reaches 133 lm/W driven by 20mA, while the power chip in the same series reaches 110 lm/W at 350mA.

Cree, Inc., announces the commercial availability of the award-winning XLamp(R) XP-G LED in warm- and neutral-white color temperatures (2600 K to 5000 K CCT). These new XP-G LEDs extend Cree's highest level of light output and efficacy across the white color spectrum, driving general lighting applications such as LED replacement lamps, outdoor area and commercial luminaires.

LEDKE Technology Co., Ltd recently introduce soft flexible led light strip. This strip is used soft PCB board as a substrate, high-brightness SMD LEDs as light source, the LEDs evenly distributed on the surface of strip PCB board, light-emitting angle of 120 - 180 degrees, and with very slim design. Every three LEDs compose a loop, you can cut off the strip between each 3 LEDs along the cutting line marked on the PCB, on the back there is 3M adhesive for pasting, can be arbitrarily fixed on the uneven surface.

Cypress Semiconductor Corp. today announced that its PowerPSoC(r) embedded power controller is an integral part of the revolutionary new iPAR-38(tm) LED replacement bulb from MSi. The new bulb leverages PowerPSoC's programmability and flexibility to deliver unique features including adjustable power levels, communications capability, and the ability to be dimmed through the use of virtually any installed dimming system.

Recently, China Gosoled Lighting(GS) releases a new product----Led Spotlights Ⅲ and claims that its life span is 40 times longer than incandescent bulb. This type of Led belongs to SHINElights series. Moreover, the new product of this series has more obvious advantage than the old types, such as uniform light, non- flare and without dark space, especially without light leakage in the side and in the back of the light, so it takes advantage of the light well.

New amber, red, green, and blue LEDs target outdoor and indoor electronic sign and signal manufacturers

Highly efficient and environmentally friendly solid-state LED luminaire delivers massive energy savings for industrial, commercial and infrastructure applications, worldwide.

Tyco Electronics today released the new IDC SSL connector for quick, tool-less termination of discrete wires onto LED printed circuit boards (PCBs).  The product terminates 18 through 24 AWG solid and stranded wire utilizing insulation displacement technology to eliminate the labor-intensive task of pre-stripping wires and soldering.

D-LED Technologies has recently announced the launch of its new modular 20mm optic holders system “OptoSNAP”. OptoSNAP is a “snap-on” 20mm optic holder and easily attaches itself to an MCPCB / FR4 PCB. OptoSNAP is made out of small interlocking modules which allow the creation of various lengths and combinations. The system is made of 3 parts: 1. Optic Holder 2. Rim cover 3. Closed cover

LUXEON c delivers a more efficient, cost effective LED solution for appliance, portable and personal lighting solutions Addressing the lighting industry’s need for smaller, more powerful, and long-lasting LEDs for applications like refrigerators, freezers, and washing machines, Philips Lumileds today is introducing LUXEON c, the company’s latest addition to its LUXEON power LED portfolio.

Optigami, LLC announces the availability of more efficient LED optics. The MR16 and PAR30 Miro® silver based optics provide upto a 30% efficiency improvement over total internal reflection plastic optics or simple Aluminum reflectors. Optigami’s standard components are intended for illumination applications requiring less than 60 degree full width beam spread where an additional homogenizer is also in use. Optigami is a U.S. startup specializing in the application of laminar 98% reflective material to 3D optical surfaces.

Austriamicrosystems, a designer and manufacturer of high performance analog ICs, today announced the AS3645 LED flash driver. This inductive, ultra-small, high-efficiency single/dual LED flash driver offers 25 percent higher output current than existing equivalents. The higher flash power enhances picture and video quality especially in low light environments at the same system size.

Mains dimmable LED drivers are leading edge and trailing edge compatible

OSTAR Compact: SMT LED for light guides in the automotive sector

With the standard linear packaged selections of 1W and 3.5W EdiLine III series, Edison Opto recently announces a new module selection for EdiLine III arrays. EdiLine III array is factor-mounted with Pb-free reflow soldering on MCPCB. With the MCPCB and provided M2 screw sockets, the EdiLine array is easily-mounted and applied in a variety of fixture or design applications.

JSR Corporation (President: Mitsunobu Koshiba) has announced plans to launch a new series of performance materials by the name of "LUMILON"(TM), materials for high-luminance LEDs. There are growing market needs for high-luminance LEDs, which are extensively being used in a variety of applications such as for in-car use, various lighting fixtures and displays, as components to reduce environmental impact. In order to respond to such market needs, JSR will extend its materials for high-luminance LEDs.