TYNTEK launched K-mark certified LED bicycle headlamp

TYNTEK Applied Product Division introduced a very bright 3W single LED headlamp. It achieves 40Lux from 10meters away. The lamp meets German bicycle headlamp regulation and it is K-Mark certified. TYNTEK's Optical Center designed the reflector which creates relatively sharp horizontal cutoff line. The light pattern is cut off to the top of the beam to keep focused light out of the eyes of oncoming drivers. To be simple, beam is brightest at the top getting progressively dimmer towards the bottom just like a high quality automobile low beam. In addition, its beam is narrow at the top but relatively broad down to the bottom so as to give light to the road both close to cyclist and far away.

Powered by rechargeable alkaline battery. Full power setting gives a 5 hour run time. Massive production and exporting to Europe will be starting by the end of 2010.

TYNTEK's K-mark certified LED bicycle headlamp

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<

Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.