New IoT-Ready Alliance to Establish Industry Standard for IoT Sensor Installation in LED Lighting Fixtures

Industry-leading organizations like Enlighted, Tridonic and DesignLights Consortium are working to establish a standard for “IoT-Ready™” light fixtures that can easily be upgraded with sensors and connectivity modules after installation.
 
(Image: Tridonic)
 
Lighting and LED driver manufacturers, Internet of Things (IoT) technology companies, and industry groups have established the IoT-Ready Alliance, dedicated to making installation of IoT technology in luminaires easy now and in the future.
 
The Alliance is setting industry standards that will enable LED light fixtures to be “IoT-Ready,” facilitating a quick and easy installation of advanced IoT sensors - as simple as changing a light bulb. This will also enable building operators to easily upgrade the sensors, ultimately future-proofing their buildings as IoT technology continues to advance at a much more rapid pace than that of LED fixtures.
 
Lighting fixtures are an ideal carrier for IoT technology in smart buildings, providing ubiquitous location for granular data collection throughout the building while delivering electric power to the sensors. Yet today, only a small percentage of LED fixtures have smart sensors. After the initial installation of LED fixtures, installing a sensor is cost prohibitive, making the later addition of sensors unlikely.
 
LED light fixtures typically boast a long lifetime of 15 years or more, while IoT and smart sensor technology is evolving rapidly, at a similar pace to that of the mobile phone. This means major IoT technology upgrades will certainly occur throughout the LED fixture’s life. These upgrade cycles for the IoT sensors call for a cost-effective, low-impact method of changing sensors.
 
Enlighted CEO Joe Costello stresses the need to solve this challenge immediately – a call which is being answered by the IoT-Ready Alliance. “There is tremendous urgency to enable today’s shipping LED luminaires to be easily upgraded with IoT technology. Otherwise, these luminaires condemn buildings to be unintelligent for the entire lifecycle of those fixtures. Fifteen or more years is a long time before building owners  have another chance to install smart sensors. With IoT-Ready fixtures, customers can install future-proof LED luminaires in their buildings.”
 
The Alliance’s initiative addresses this challenge head on – standardizing an interface between any luminaire and any IoT sensor. This allows the sensors to be easily added or upgraded at any point in time.
 
“We are very pleased key players from the lighting industry have come together to meet the needs of our customers, and Tridonic is a driving part of it,” said Guido van Tartwijk, CEO at Tridonic. “IoT-Ready future-proofs lighting fixtures so that customers do not have to worry about forward compatibility to upcoming technology upgrades that are expected in the fast-developing world of IoT.”
 
The IoT-Ready Alliance is currently working to standardize the key interface characteristics needed to make this happen. Both fixture-integrated and external sensors are being addressed. The IoT-Ready standards will include definitions for electrical interfaces, connectors, and mechanical form-factors.
 
“IoT-based lighting systems have tremendous potential to optimize energy efficiency and bring new kinds of value to the lighting and building industries and beyond,” said Gabe Arnold, Technical Director at DesignLights Consortium™. “By standardizing the interface between these IoT systems and the luminaires they are attached to, the IoT-Ready™ Alliance is addressing an essential aspect needed to unlock the full technology potential and enable widespread adoption.”
 
Initial industry participants include Aruba (a Hewlett Packard Enterprise company),
Click Technology Co., Ltd., DECO Lighting, DesignLights Consortium™, Enlighted, ERP Power LLC, Focal Point, MEAN WELL, Orion Energy Systems, Inc., Selux, Shenzhen Lighting Control Co., Silergy Corp, Tridonic, Universal Lighting Technologies and USAI Lighting.
 
The Alliance is open to any organization interested in driving the future of IoT and smart buildings. Visit www.IoT-Ready.org or Lightfair booth #3849 to learn more about the IoT-Ready™ Alliance and how to participate.
Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Tokushima, Japan - 6 March 2024: Nichia, the world's largest LED manufacturer and inventor of the high-brightness blue and white LED, has started mass production of the new UV-B (308nm) and UV-A (330nm) LEDs in its popular 434 Series packa... READ MORE

New XLamp® S Line LEDs enhance growth, last longer, lower energy costs Horticulture and other forms of agricultural lighting require application-tuned ratios of spectral content, high efficacy and long lifetimes. Whether you are interested... READ MORE