GlacialPower Launches Highly Efficient 100W LED Driver

GlacialPower, a division of the LED technology manufacturer GlacialTech, launches the GP-LS100P-57 1E, a 100 Watt LED driver with a 60V DC output, which offers constant current and constant voltage operation modes. This latest addition to the GlacialPower LED driver range is tough, flexible, efficient and reliable. It is ideal for demanding outdoor or indoor applications and challenging environmental conditions, as it is protected by IP67 waterproofing and dust ingress prevention. This driver handles a very wide input power range of 90 to 305 VAC at 47 to 63 Hz, and safety is further enhanced by full OVP, OCP, SCP, and OTP protection. The GP-LS100P-57 1E also supports stringent new EU power efficiency directives – GlacialPower emphasizes environmental protection and power bill reduction in the design of this new LED driver.

GlacialPower LED driver GP-LS100P-57 1C. (GlacialPower/LEDinside)

Rugged and reliable, with full safety features

The GP-LS100P-57 1E is designed from the ground up for flexibility, taking in its stride challenging lighting applications where the driver may be exposed to extreme environments and weather, either indoors or outdoors. This driver’s versatility enables it to meet a very wide range of user applications and demands. It is protected from environmental threats by its IP67 rated enclosure, which is both waterproof and dustproof. The enclosure itself is IP67 rated, while the power connectors are IP68 rated and can be plugged in or unplugged without removing the housing – saving time and maintenance costs. A wide array of electrical and thermal safety features – such as Over-Voltage Protection (OVP), Over-Current Protection (OCP), Short-Circuit Protection (SCP) and Over-Temperature Protection (OTP) – helps to ensure safety and a long, maintenance-free life.

Rated for efficiency and environmental protection

Power consumption is automatically cut to less than 0.5 Watts when the driver has no load, boosting energy savings with minimal user intervention. In fact, GlacialPower’s latest driver complies fully with Stage 3 of the stringent ErP (EU) No. 1194/2012 directive mandating efficiency standards for energy-related products. The GP-LS100P-57 1E’s active power factor correction enhances its efficient use of input power. The product also boasts high power output efficiency.

 GlacialPower LED driver and IP68 power connectors for AC and DC applicaitons. (GlacialPower/LEDinside)

Great user experience, plus LED protection

The GP-LS100P-57 1E’s fast startup and electrical stability ensures a pleasant lighting environment, whenever users demand it. Under full load, this driver is highly responsive, providing a setup time, of no more than 0.5 seconds at 230 VAC, and a maximum of one second at 115 VAC. The driver’s high output voltage quality protects your LED lighting units from harm and also provides an attractive lighting environment enhancing staff and customer satisfaction. The driver's output voltage is clean and stable, with minimal ripple and very low noise levels (below 260mV), ensuring a stable light from your LED units, without flicker.

Features:

  • Universal AC input, from 90 to 305 VAC.

  • Built in Active Power Factor Correction.

  • Safety protections include OVP, OCP, SCP, and OTP.

  • Constant current and constant voltage modes.

  • IP67 rated for protection from water and dust.

  • IP68 waterproof connectors for convenient maintenance.

  • Compliant with the ErP (EU) No. 1194/2012, Stage 3 directives.

  • Consumes less than 0.5W in idle, no load status.

  • Starts up in less than 0.5 seconds at 230 VAC.

 

Specifications

Model No.

GP-LS100P-57 1E

Output

DC Voltage

60V

Constant Current Region

48-60V

Rated Current

1.65A

Current Tolerance

-5% ~ +5%

Rated Power

100W

Ripple & Noise (Max.)

260mV

Efficiency at 230 VAC (Typ.)

90%

Voltage Tolerance

-1%~+5%

Set up time (Max.)

0.5s / 230 VAC, 1s / 115 VAC, at full load

Input

Voltage Range

90 ~ 305 VAC / 127 ~ 430 VDC

Frequency Range

47 Hz ~ 63 Hz

AC Current (Max.)

1.4A at 115 VAC / 0.7A at 230 VAC

Power Factor

0.98 at 115 VAC / >0.95 at 230 VAC at full load
(≧0.9 at 230 VAC at 80% load)

THD

<20%

No Load Consumption (Max.)

<0.5W

Inrush Current (Max.)

COLD START 50A at 230 VAC

Leakage Current

<0.75mA / 240 VAC

 

Read more about the new GP-LS100P-57 1E at GlacialPower's website:

http://www.glacialpower.com/products/led-driver-PFC4.htm

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Innovative tunable white, mid-power LED enables luminaire manufacturers to improve colour tuning, shrink optics and fixture profiles, while enabling new design options. Nichia, the leader in and inventor of the high-brightness LED, announces i... READ MORE

Natural colour rendering of Optisolis™ LEDs lets visitors experience artwork as the artist intended without degrading the work. Tokushima, Japan – 23 July 2019: Nichia Corporation, the leader in high brightness LED technologies, an... READ MORE