2015-02-11

KPU Launches Silver Nanowires for Transparent Conductive Electrode to GaN-based LEDs

Transparent, conductive, and uniform Ag nanowires (NWs) were introduced to improve the optical performance of GaN-based light-emitting diodes (LEDs) by a spin-coating technique. The Ag NWs acted as a current spreading layer, exhibiting high transmittance and low sheet resistance, and ultimately leading to high performance GaN-based LEDs with an ultra large size of 5 × 5 mm2. Compared to the transmittance of conventional LEDs without Ag NWs, the relative transmittance of LEDs with Ag NWs was approximately 90% of the overall wavelength region. However, the electroluminescence (EL) intensity of LED with Ag NWs was much higher than that of conventional LEDs without Ag NWs for injection current above 45 mA. In addition, the EL full width at half maximum of LEDs with Ag NWs was much lower than that of conventional LEDs without Ag NWs. Based on these results, we believe that the enhanced optical performance of ultra large LEDs was due to an increase in the current spreading effect.
Continue reading

The CLEDIA project, co-financed by the Auvergne-Rhône-Alpes A group of logos with different names AI-generated content may be incorrect. Region and Bpifrance has just been completed after three years of collaborative innovation between P... READ MORE

Seoul Semiconductor has developed an innovative LED light source—SunLike—that reproduces a spectrum nearly identical to natural sunlight. The technology is gaining attention for its positive effects on eye health, including reducing ... READ MORE