LayTec and German University Collaborate on In-situ Photo-Luminescence of Growing III-Nitride LED Structures

In a collaboration between LayTec and Prof. Dirk Rueter´s group at University of Applied Sciences Ruhr West a breakthrough has been achieved regarding the real-time monitoring of InGaN/GaN quantum well emission wavelength during MOCVD growth. It is well known that room temperature wafer based photoluminescence (PL) measurements provide an excellent forecast of the emission wavelength and emission intensity of the later LED devices. Recently, a prototype in-situ PL system worked simulatnneously with a LayTec Pyro 400 in a commercial multi-wafer MOCVD reactor. The related paper [2] was rocketed immediately to the status of  “most downloaded Journal of Crystal Growth articles”  from Science Direct. This  work is supported under grant KF3242801NT3 by BMWi (German Federal Government).

In-situ PL spectra at 690 °C of an InGaN MQW structure. The spectra of the complete QWs were taken after growth of the subsequent GaN barrier layer.(Photo Courtesy of LayTec)
   

[2] C. Prall et al. in Journal of Crystal Growth 415 (2015), 1–6. The full paper can be viewed here.

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Specifiers can realize the best quality of light and the highest levels of light output and efficacy at 3000K and 95CRI San Jose, CA – Lumileds today announced substantial performance improvements for its 90 and 95 CRI LUXEON CoBs with C... READ MORE

For many years, XLamp® XP-E2 LEDs have been the preferred LED choice for lighting manufacturers looking to combine different colors of light together to service specialty lighting applications. The XP-E2 platform offers an unbeatable combi... READ MORE