Samsung Display says MicroLED will be used in AR over OLED

News Source: 


Image: TheElec

A Samsung Display executive said on Friday that MicroLED displays will likely be used over OLED display panels in augmented reality (AR) devices.

Samsung Display group leader Kim Min-woo said at MicroLED Display Workshop industry event in Seoul that this was because high luminance, or brightness, was needed to realize AR.

This will require the development of new light-emitting diodes and won’t be possible with OLED.

Display panel makers like Samsung Display are developing On Silicon panels that use silicon instead of glass to make the microdisplay needed in AR devices.

Sources have previously told TheElec that the company was developing both OLEDoS and LEDoS technologies.

The long-term aim of the display panel maker was to develop a LEDoS with 6600pixels per inch resolution.

During the event, Kim also said that AR, virtual reality and mixed reality had all different specific needs.

The executive said AR needed more brightness than VR as it interacted with the real world.

This also means it needs to be lighter and the panel smaller comparatively, he said.

OLED has conventionally lower luminance levels compared to LED. LED also uses inorganic material and doesn’t need encapsulations.

Kim said that an AR display will at minimum require 5000ppi and the pixel pitch, or the distance between the pixels, must be 5 micrometers or below and the red, green and blue subpixels must be 3 micrometers or smaller.

The LED chip said must also be 10 micrometers or smaller, he added.

출처 : THE ELEC, Korea Electronics Industry Media(http://thelec.net) 

 

2022 Micro LED Self-Emissive Display Trends and Analysis on Suppliers’ Strategies
Release Date: 31 May 2022 / 30 November 2022
Language: Traditional Chinese / English
Format: PDF

If you would like to know more details , please contact:

Global Contact:
 
ShenZhen:
Grace Li
E-mail :  Graceli@trendforce.com
Tel : +886-2-8978-6488 ext.916
  Perry Wang
E-mail :  Perrywang@trendforce.cn
Tel : +86-755-82838931 ext.6800
Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Pro9™ LEDs set the new standard for high fidelity (90 & 95 CRI min) LEDs   15% higher efficacy for 90 & 95 CRI LEDs 90 CRI light quality at 80 CRI LPW 95 CRI light quality at 90 CRI LPW Upgrade light quality without sacrific... READ MORE

M53-100   The M53-100, a 400 W 905 nm multi-junction VCSEL array, is an innovative, automotive-qualified product, ideal for short- to long-range flash time-of-flight (ToF) LiDAR solutions in automotive, industrial, and robotics applicatio... READ MORE