Power Integrations Introduces Driver Reference Designs for CREE LED Bulbs

Power Integrations, the leader in high-efficiency, high-reliability LED-driver ICs, today announced four reference designs describing drivers for dimmable PAR 30 and PAR 38 LED light bulbs. Jointly developed by Power Integrations and CREE, the designs showcase the combination of Power Integrations’ LYTSwitch™-4 driver ICs and CREE MT-G2 EasyWhite LEDs. DER-364 and DER-365 detail low- and high-line PAR 30 LED bulb drivers, respectively, while DER-350 and DER-396 address low- and high-line PAR 38 bulbs. These and other reference designs are hosted at www.powerint.com/ledrivers/cree.

LYTSwitch-4 ICs are highly efficient and deliver accurate output current regulation in bulb and tube replacement applications and high-bay lighting. The devices simplify design and reduce cost while ensuring that lamps deliver uniform light output and provide exceptional performance in TRIAC-dimmable applications. LYTSwitch-4 ICs combine PFC and constant current in a single-stage topology, resulting in power factor greater than 0.95 and typical efficiencies of better than 90%. The single-stage approach also eliminates temperature-sensitive electrolytic bulk capacitors, greatly increasing the bulbs’ reliability and lifetime. LYTSwitch-4 ICs also operate at a high switching frequency (132-kHz), enabling smaller, lower-cost magnetics to be used, while frequency jittering reduces the need for EMI filtering. These factors combine to deliver LED-driver designs that fit easily into space-restricted bulbs.

Power Integrations Introduces Driver Reference Designs for CREE LED Bulbs (LEDinside/Power Integrations)

Designs based on the new drivers easily meet EN61000-3-2C regulations for total harmonic distortion (THD), and can achieve less than 10% THD. Regulation is better than +/- 5% across load and production spread, reducing the need for over-design to meet minimum luminance targets and cutting system cost. LYTSwitch-4 drivers deliver excellent dimming performance down to low conduction angles with leading-edge or trailing-edge TRIAC dimmers. Start-up is very fast – typically less than 500 milliseconds even when dimmed to less than 10% light output – and pop-on is virtually eliminated.

Comments Andrew Smith, senior product marketing manager for Power Integrations: “We have worked closely together with CREE to deliver real-world LED lighting systems that live up to their potential, delivering reduced power consumption and increased lifetime. These reference designs enable designers to realize cost-effective, long-lasting LED bulbs simply and quickly.”

DER-364, DER-365, DER-350 and DER-396 are all downloadable at www.powerint.com/en/design-support/reference-designs/design-examples, or by visiting www.powerint.com/ledrivers/cree. Product datasheet and product introduction videos are also available on the Power Integrations website at www.powerint.com/products/lytswitch-family/lytswitch.

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Tokushima, Japan - 6 March 2024: Nichia, the world's largest LED manufacturer and inventor of the high-brightness blue and white LED, has started mass production of the new UV-B (308nm) and UV-A (330nm) LEDs in its popular 434 Series packa... READ MORE

New XLamp® S Line LEDs enhance growth, last longer, lower energy costs Horticulture and other forms of agricultural lighting require application-tuned ratios of spectral content, high efficacy and long lifetimes. Whether you are interested... READ MORE