New Perovskite Research Findings Could Advance Solar Cell and LED Technology

“Promising” and “remarkable” are two words U.S. Department of Energy’s Ames Laboratory scientist Javier Vela uses to describe recent research results on organolead mixed-halide perovskites.

Perovskites are optically active, semiconducting compounds that are known to display intriguing electronic, light-emitting and chemical properties. Over the last few years, lead-halide perovskites have become one of the most promising semiconductors for solar cells due to their low cost, easier processability and high power conversion efficiencies. Photovoltaics made of these materials now reach power conversion efficiencies of more than 20%.

U.S. Department of Energy’s Ames Laboratory scientist Javier Vela  recent perovskite research findings. (DOE Ames Laboratory)

Vela’s research has focused on mixed-halide perovskites. Halides are simple and abundant, negatively charged compounds, such as iodide, bromide and chloride. Mixed-halide perovskites are of interest over single-halide perovskites for a variety of reasons. Mixed-halide perovskites appear to benefit from enhanced thermal and moisture stability, which makes them degrade less quickly than single-halide perovskites, Vela said. He added they can be fine-tuned to absorb sunlight at specific wavelengths, which makes them useful for tandem solar cells and many other applications, including light emitting diodes (LEDs).Using these compounds, scientists can control the color and efficiency of such energy conversion devices.

Speculating that these enhancements had something to do with the internal structure of mixed-halide perovskites, Vela, who is also an associate professor of chemistry at Iowa State University (ISU), worked with scientists with expertise in solid-state nuclear magnetic resonance (NMR) at both Ames Laboratory and ISU. NMR is an analytical chemistry technique that provides scientists with physical, chemical, structural and electronic information about complex samples. 

“Our basic question was what it is about these materials in terms of their chemistry, composition, and structure that can affect their behavior,” said Vela.

Scientists found that depending on how the material is made there can be significant nonstoichiometric impurities or “dopants” permeating the material, which could significantly affect the material’s chemistry, moisture stability and transport properties.

The answers came via the combination of the use of optical absorption spectroscopy, powder X-ray diffraction and for the first time, the advanced probing capabilities of lead solid-state NMR.

“We were only able to see these dopants, along with other semicrystalline impurities, through the use of lead solid-state NMR,” said Vela.

Another major discovery scientists made was that solid state synthesis is far superior to solution-phase synthesis in making mixed-halide perovskites. According to Vela, the advanced spectroscopy and materials capabilities of Ames Laboratory and ISU were critical in understanding how various synthetic procedures affect the true composition, speciation, stability and optoelectronic properties of these materials.

“We found you can make clean mixed halide perovskites without semi-crystalline impurities if you make them in the absence of a solvent,” Vela said.

According to Vela, the significance of their findings is multifold and they are only beginning to grasp the implications of those findings.

“One obvious implication is that our understanding of the amazing opto-electronic properties of these semiconductors was incomplete,” said Vela. “We’re dealing with a compound that is not inherently as simple as people thought.”

The research is further discussed in a paper, “Persistent Dopants and Phase Segregation in Organolead Mixed-Halide Perovskites,” authored by Vela, Bryan A. Rosales, Long Men, Sarah D. Cady, Michael P. Hanrahan, and Aaron J. Rossini; and published online in Chemistry Materials. The work was supported by DOE’s Office of Science.

Ames Laboratory is a U.S. Department of Energy Office of Science national laboratory operated by Iowa State University. Ames Laboratory creates innovative materials, technologies and energy solutions. We use our expertise, unique capabilities and interdisciplinary collaborations to solve global problems. 

DOE’s Office of Science is the single largest supporter of basic research in the physical sciences in the U.S., and is working to address some of the most pressing challenges of our time. For more information, please visit science.energy.gov

Javier Vela, Ames Laboratory scientist, (515) 294-5536
Steve Karsjen, Ames Laboratory Public Affairs, (515) 294-5643

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Tokushima, Japan - 6 March 2024: Nichia, the world's largest LED manufacturer and inventor of the high-brightness blue and white LED, has started mass production of the new UV-B (308nm) and UV-A (330nm) LEDs in its popular 434 Series packa... READ MORE

New XLamp® S Line LEDs enhance growth, last longer, lower energy costs Horticulture and other forms of agricultural lighting require application-tuned ratios of spectral content, high efficacy and long lifetimes. Whether you are interested... READ MORE